Near Field Probes are used in EMC laboratories and by PCB developers when troubleshooting EMC problems. There are different parameters that distinguish near field probes from each other, different near field probes have different test frequencies, resolutions, attenuation and other parameters, please check the detailed products below or contact us for more information.
The FS-SET 7100 B is a near-field probe kit manufactured by Schwarzbeck, Germany and authorized for sale by EUTTEST Shenzhen. The kit contains two magnetic near-field probes and a...View this product
SX-R 20-1 is a magnetic field probe manufactured by langer-emv and distributed by EUTTEST. It is available in the frequency range of 1GHz to 20GHz and is recommended for use at high frequencies, with a 20GHz...View this product
The SX1 set is a near-field probe set manufactured by langer-emv and distributed by EUTTEST. The SX1 set consists of two passive near-field probes for high clock frequency measurements in the development phase...View this product
The RF-U Model 2.5-2 Magnetic Field Probe is a near-field probe for detecting RF currents in wires, component pins, SMD assemblies and integrated circuit pins. This probe has an approximately 0.5mm wide magnetic field sensitive notch at the tip, measuring...View this product
The RF-R 3-2 near-field probe with high resolution is used for the direct detection of RF magnetic fields on electronic assemblies, such as magnetic fields in pin regions, IC housings, wires, bypass capacitors and electromagnetic compatibility (EMC) components. The magnetic field...View this product
The Model RF-K 7-4 Near Field Probe is capable of measuring annular magnetic field lines that enter the probe in a reverse direction. These magnetic lines are typically found on wires, bar structures, cable splices, edges of flat cells, etc. The probe operates in a manner similar to that of an electric... The probe operates in the manner shown below similar to an electrical...View this product
The RF1 set is a passive near-field probe set manufactured by langer emv in Germany and distributed by EUTTEST.The RF1 near-field probe set consists of 4 passive near-field probes for the measurement of electronic modules in the development phase...View this product
The electrodes of the Electric Field Probe Type RF-E 10 are located on the lower side of the probe and are approximately 0.2 mm wide, allowing the smallest sources of electric field to be located, e.g. 0.1 mm wide wires, individual pins of high pin-count integrated circuits. Magnetic Field Probe RF-E 10...View this product
EUTTEST website search：
Enter information such as instrument and equipment model
Wait for real-time search results to be listed
