EUTTEST distributes and sells flexible current probes that can be applied directly to the cable under test to measure up to 350,000 A at 50 Hz. Flexible current probes can be customized in terms of size and specifications according to the diameter of the cable under test and the maximum current.
Flexible current probes are magnetic loops designed to measure interfering current signals in wires according to Faraday's principle, using current probes to measure the amount of current flowing through a wire.
The output of the flexible current probe can be directly connected to any brand ofoscillographUsage. Flexible current probes have a bandwidth of 30MHz and a coil voltage of up to 3KV, allowing them to detect in many places where hard probes cannot reach (e.g. inside a UPS chassis or on equipment with a large diameter), and they are compatible with any brand of oscilloscope and multimeter.
Switching power supply, electronic rectifier, new energy vehicles, motor drive, LED lighting and other industries.
DK-350000 is one of the DK series of flexible current probes, sold by Shenzhen EUTTEST agent, this is the largest current in the DK series of probes, can test 350,000A, do not need to configure other current interconnectors ...View this product
DK-140000 Flexible Current Sensor is sold by Shenzhen EUTTEST agent, the maximum test current is 140000A, which is a safe instrument can be provided to all oscilloscopes and digital multimeters (need to configure special...View this product
DK-70000 Flexible Current Probe is a product distributed and sold by Shenzhen EUTTEST, designed for current testing up to 70,000A, the probe coil can be customized in size for clamping larger cables. After putting the flexible...View this product
DK-35000 is a flexible current sensor product distributed by Shenzhen EUTTEST, using a conversion ratio of 0.2 can be up to 35000A current conversion to a maximum output voltage of 7V, is your ideal electronic power ...View this product
The DK-14000 and all DK Series Flex Current Probes sold by EUTTEST are universally used to test oscilloscope AC current signals, and can also be used to make numerical AC measurements with a multifunction input meter, which can be utilized by purchasing a factory...View this product
DK-7000 is one of the flexible current probes distributed by EUTTEST, the maximum test current is up to 7000A, when using the DK-7000 flexible current probe clamped on the object to be measured, please pay attention to the current ...View this product
DK-3500 is a flexible current probe coil sold by Shenzhen EUTEST agent, this probe can test the current of 35A-3500A, can be used in the range of 50Hz-30MHz, the maximum input voltage is only 7...View this product
DK-2000 by Shenzhen EUTTEST agent sales, can test up to 2000A 50Hz frequency current, the minimum can test 35A current, in 50Hz-150kHz can be used. Flexible electric...View this product
EUTTEST website search:
Enter information such as instrument and equipment model
Wait for real-time search results to be listed