Injection type current probes are used to inject high-frequency interference voltage signals into the power or signal lines of the electronic products under test, and are also known as high-current injection or conducted immunity testing.
F-191011-1008-1 is an injection type current probe manufactured by FCC and authorized to be sold by EUTTEST Shenzhen, F-191011-1008-1 is a large-diameter, high-efficiency...
F-180101-1008-1 is a BCI high current injection probe manufactured by FCC and authorized by Shenzhen EUTTEST for sale, which is suitable for open-loop application as required by ISO11452-4...
F-170701-1008-1 is a BCI high current injection probe manufactured by the FCC for general use in ISO 11452-4 BCI testing, F-170701-1008-1 is a...
The F-170501-1008-1 is a BCI high current injection probe manufactured by FCC in the U.S.A. The F-170501-1008-1 is capable of injecting very high currents into signal or power circuits up to 40 mm in diameter....
F-161012-1008-1 is a BCI high current injection probe produced by FCC and authorized by Shenzhen EUTTEST for sale. F-161012-1008-1 High Power Injection Probe...
The FCC manufactured F-120501-1008-1 is a high efficiency injection probe designed primarily for sensitivity testing at low frequencies. A low impedance signal source is used to inject into the N-type connector of a single-turn primary coil with a 10 W loop for...
FCC manufactured F-080915-1008-1 High Power Injection Probes are typically used for ISO11452-4 BCI testing and GB151B MIL STD 461 C D E...
The FCC manufactures the F-080728-1008-1 High Power Injection Probe which is typically used for ISO11452-4 BCI testing and GB151B, MIL STD 461 C/D/E...
You can search for: study materials, equipment models on the EUTTEST website.
