Introduction:
Rohde & schwarz R&S ZVH cable and antenna analyzers are serial products of cable and antenna analyzers produced by R&S in Germany and distributed by EUTTEST, containing two different models: R&S ZVH4 and R&S ZVH8.
The R&S ZVH Cable and Antenna Analyzer is a lightweight, easy-to-operate cable and antenna analyzer designed specifically for the field to perform fast, reliable and highly accurate measurements to support RF service engineers and technicians installing and maintaining mobile radio antenna systems. Built-in wizards allow users to run complex test sequences quickly and easily.
R&S ZVH Cable and Antenna Analyzer Features:
EUTTEST distributes and sells ZVH cable and antenna analyzers with a wide range of measurement capabilities. To request a quote, please follow the application guide below to describe your testing needs and contact us for more information about ZVH.
Installation of antenna systems
- Distance to Fault Measurement (DTF):Over-squeezed cables and loose or corroded cable connections can seriously affect the transmission of the transmitted or received signal. The Fault Distance function measures the exact distance to the fault location.
- Single Port Cable Loss Measurement: Users can easily determine the cable loss of installed cables. Simply connect one end of the cable to the ¸ZVH test port and leave the other end shorted or open.
- Reflectometry:Reflection measurements provide a very accurate measurement of antenna and amplifier matching. The measurement is based on vector system error correction. The results are displayed as return loss (dB) or voltage standing wave ratio (VSWR).
- Transmission measurements:The ZVH-K39 option can be used to measure transmission characteristics (insertion loss or gain characteristics, antenna isolation measurements) of components such as filters and amplifiers.
- Built-in DC voltage supply
- Use a GPS receiver to locate the position:The display will indicate the longitude, latitude and elevation of the site.
- Factory calibration of the R&S ZVH
Maintenance of antenna systems
- Dual-port vector network analysis: The ZVH-K42 option converts the ZVH into a two-port vector network analyzer. Users can quickly and accurately measure the matching and transmission characteristics of filters, amplifiers, and other devices in a single measurement setup that includes forward and reverse testing.
- Vector Voltmeter: The ZVH-K45 vector voltmeter option displays the amplitude and phase of the DUT at a fixed frequency.
- Terminalized and Directional Power Measurement: With the option, the ZVH can be used as an accurate RF power meter with a measurement range of -67 dBm to +45 dBm.
- Connect broadband power probe for pulse analysis: Configured with options the ZVH can measure the peak power and main pulse parameters of pulsed signals with frequencies up to 44 GHz.
- Built-in channel power meter: The ZVH-K19 option allows the ZVH to measure channel power without the need for an external power probe.
- Spectrum analysis measurements: ZVH-K1 option:
- channel power
- bandwidth consumption
- Power of pulsed TDMA signals
- Adjacent Channel Leakage Ratio (ACLR)
- Spurious Emission (Spectrum Emission Template)
- Measuring the modulation spectrum of a pulsed signal using selective sweeping
- Field strength of directional or omnidirectional antennas
- Measurement of harmonic-induced signal distortion
- AM modulation depth measurement
- frequency counter
- noise marking
- AM/FM audio demodulator
- Spectral waterfall plot measurements:ZVH-K14 Spectrum Waterfall Chart Measurement Application
R&S ZVH Cable and Antenna Analyzer'sprincipalFeatures:
- Frequency range from 100 kHz-3.6 GHz (8 GHz)
- 100 dB (typical) dynamic range for filter and antenna isolation measurements
- Built-in DC voltage supply (bias) for active components such as amplifiers
- Power Meter Options
- Save measurement results on an SD memory card or
- USB flash drive
- Easy operation with user-configurable test sequences (wizard)
- Easy-to-replace lithium-ion battery with 4.5 hours of operation
- Rugged, splash-proof enclosure for on-site roughing in
- Easy handling due to light weight (3 kg battery) and easy-to-reach function keys
- ZVHView software for recording measurement results
- Remote control via LAN or USB
R&S ZVH Cable and Antenna Analyzer Technical Data:
<<<<提醒:左右滑动表格>>>>Equipment Model: | R & S ® ZVH4 | R & S ® ZVH8 | |
Frequency range | 100 kHz to 3.6 GHz | 100 kHz to 8 GHz | |
manufacturer | Rohde & schwarz | Rohde & schwarz | |
agent | EUTTEST | EUTTEST | |
Standard Measurement Functions | Reflectometry, Fault Distance Measurement, Single Port Cable Loss Measurement | ||
Output power (port 1, port 2) | 0 dBm to -40 dBm (nominal) in 1 dB steps | ||
Maximum Allowable Spurious Signal Level | +17 dBm (nominal) | ||
check numbers | 101, 201, 401, 601, 631, 801, 1001, 1201 | ||
Distance to Fault (DTF) Measurement | |||
Display mode | Return Loss (dB), VSWR | ||
Resolution in meters | (1.58 x velocity factor/span) | ||
Horizontal display range | 3 m to 1500 m | ||
reflectometry | |||
directionality (molecular biology) | 100 kHz to 3 GHz (nominal) | > 43 dB (nominal) | > 43 dB (nominal) |
3 GHz to 3.6 GHz | > 37 dB (nominal) | > 37 dB (nominal) | |
3.6 GHz to 6 GHz | - | > 37 dB (nominal) | |
6 GHz to 8 GHz | - | > 31 dB (nominal) | |
Display mode | s 11Return Loss (dB), VSWR, Single Port Cable Loss | ||
Vector network analysis (R&S) ® ZVH-K42) | s 11s 22, amplitude, phase, amplitude+phase, Smith's circle plot, VSWR, reflection coefficient, eut test . Single Port Cable Loss, Electrical Length, Group Delay | ||
Vector Voltmeter (R&S) ® ZVH-K45) | Magnitude + Phase, Smith Circle Chart | ||
Transmission measurement (R&S ZVH-K39 or R&S) ® ZVH-K42) | |||
Dynamic Range (S) 21. S 12) | 100 kHz to 300 kHz | > 50 dB (nominal) | > 50 dB (nominal) |
300 kHz to 2.5 GHz | > 80 dB (typical) 100 dB | > 80 dB (typical) 100 dB | |
2.5 GHz to 3.6 GHz | > 70 dB (typical) 90 dB | > 70 dB (typical) 90 dB | |
3.6 GHz to 6 GHz | - | > 70 dB (typical) 90 dB | |
6 GHz to 8 GHz | - | > 50 dB (nominal) | |
Display mode | Transmittance Measurement (R&S ZVH-K39) | s 21Amplitude in dB (Loss, Gain) | |
Vector network analysis (R&S ZVH-K42) | s 21s 12, amplitude (loss, gain), phase. Amplitude + Phase, Electrical Length, Group Delay | ||
Vector Voltmeter (R&S ZVH-K45) | Amplitude + Phase | ||
DC power supply (DC bias, port 1 and port 2) | |||
Voltage range | Internal power supply | +12 V to +32 V in 1 V steps | |
Maximum output power | 4 W (battery), 10 W (AC power) | ||
Maximum current | 500 mA | ||
Maximum voltage | external power | 50 volts | |
Maximum current | 600 mA | ||
General data | |||
demonstrate | With VGA Resolution 6.5-inch color LCD | ||
Battery operating time | R & S ® HA-Z204, 4.5 A | Up to 3 hours | |
R & S ® HA-Z206, 6.75 ah | Up to 4.5 hours | ||
Dimensions (W×H×D) | 194 mm x 300 mm x 69 mm (144 mm)1)(math.) genus 7.6 inches x 11.8 inches x 2.7 inches (5.7 inches)1) | ||
weight | <3 kg, 6.6 lbs |
- With carrying handle.
The ZVH-K19 option enables the R&S ZVH to measure channel power without the use of an external power probe and with the same accuracy as the R&S ZVH-K1 spectrum analysis option. The measurement amplitude range is increased to +30 dBm.
Optional accessories for the R&S ZVH Cable and Antenna Analyzer:
EUTTEST offers the following ZVH accessory quotation service.
<<<<提醒:左右滑动表格>>>>name (of a thing) | Model number | part numbers | |
main equipment | |||
Cable & Antenna Analyzer 100 kHz to 3.6 GHz | R&S ZVH4 | 1309.6800.24 | |
Cable and Antenna Analyzer 100 kHz to 8 GHz | R&S ZVH8 | 1309.6800.28 | |
attachment | |||
Lithium-ion battery pack (4.5 Ah), USB cable, LAN cable, plug-in power supply, CD-ROM with R&S ZVHView software and documentation, Quick Start Guide | |||
Software Options (Usually through a software license) | |||
Spectrum analysis applications | R&S ZVH-K1 | 1309.6823.02 | |
Power meter measurement application included with R&S FSH-Zxx or R&S NRP-Zxx power probes (Requires R&S FSH-Zxx or R&S NRP-Zxx power probe)1) | R&S ZVH-K9 | 1309.6852.02 | |
channel power meter | R&S ZVH-K19 | 1304.5987.02 | |
Spectrum Waterfall Chart Measurement Application | R&S ZVH-K14 | 1309.7007.02 | |
Connect power probe for pulse measurement 2) | R&S ZVH-K29 | 1304.0491.02 | |
Transmission Measurement Applications | R&S ZVH-K39 | 1309.6830.02 | |
LAN or USB remote control applications | R&S ZVH-K40 | 1309.7013.02 | |
Vector network analysis applications | R&S ZVH-K42 | 1309.6846.02 | |
Vector Voltmeter Measurement Application | R&S ZVH-K45 | 1309.6998.02 | |
attachment (email) | |||
RF cable (length: 1 m), N male/N female, for R&S FSH-K41 option, DC to 8 GHz | R&S FSH-Z320 | 1309.6600.00 | |
RF cable (length: 3 m), N male/N female, for R&S FSH-K41 option, DC to 8 GHz | R&S FSH-Z321 | 1309.6617.00 | |
Open/Short/50 Ω Load Combination Calibration Standard for Calibration of VSWR and DTF Measurements, DC to 3.6 GHz | R&S FSH-Z29 | 1300.7510.03 | |
Open/Short/50 Ω Load Combination Calibration Standard for Calibration of VSWR and DTF Measurements, DC to 8 GHz | R&S FSH-Z28 | 1300.7810.03 | |
Calibration Kit, N male, 50 Ω, Open/Short/Match/Path Combination, 0 Hz to 9 GHz | R&S ZV-Z170 | 1317.7683.02 | |
Calibration Kit, N Female, 50 Ω, Open/Short/Match/Path Combination, 0 Hz to 9 GHz | R&S ZV-Z170 | 1317.7683.03 | |
Mating connector, 50 Ω/75 Ω, bi-directional, 0 Hz to 2.7 GHz, N female/N male. Load capacity 2 W, series resistor 25 Ω | R&S RAZ | 0358.5714.02 | |
Mating connector, 50 Ω/75 Ω, bi-directional, 0 Hz to 2.7 GHz, N female/N male. Load capacity 2 W, series resistor 25 Ω | R&S RAM | 0358.5414.02 | |
Match, 50 Ω/75 Ω, Bidirectional, 0 Hz to 1 GHz, BNC female/N male, 1 W load capacity | R&S FSH-Z38 | 1300.7740.02 | |
Adapter, N male/BNC female | 0118.2812.00 | ||
Adapter, N male/N male | 0092.6581.00 | ||
Adapter, N male/SMA female | 4012.5837.00 | ||
Adapter, N male/7/16 female | 3530.6646.00 | ||
Adapter, N male/7/16 male | 3530.6630.00 | ||
Adapter, N male/FME female | 4048.9790.00 | ||
Adapter, BNC male/banana female | 0017.6742.00 | ||
Attenuator, 50 W, 20 dB, 50 Ω, DC to 6 GHz, N female/N male | R&S RDL50 | 1035.1700.52 | |
Attenuator, 100 W, 20 dB, 50 Ω, DC to 2 GHz, N female/N male | R&S RBU100 | 1073.8495.20 | |
Attenuator, 100 W, 30 dB, 50 Ω, DC to 2 GHz, N female/N male | R&S RBU100 | 1073.8495.30 | |
GSM/UMTS/CDMA Antenna with Magnetic Clamp, 850/900/1800/1900/2100 Band, N Connector | R&S TS95A16 | 1118.6943.16 | |
Lithium Ion Battery Pack, 4.5 Ah | R&S HA-Z204 | 1309.6130.00 | |
Lithium Ion Battery Pack, 6.75 Ah | R&S HA-Z206 | 1309.6146.00 | |
Li-ion battery pack charger, 4.5 Ah/6.75 Ah3) | R&S HA-Z203 | 1309.6123.00 | |
12 V Vehicle Adapter | R&S HA-Z202 | 1309.6117.00 | |
soft toolkit. (W × H × D: 260 mm × 360 mm × 280 mm; 10.3 in × 14.2 in × 11.0 in) | R&S HA-Z220 | 1309.6175.00 | |
hard shell | R&S HA-Z221 | 1309.6181.00 | |
Carrying holster including chest harness and rain cover | R&S HA-Z222 | 1309.6198.00 | |
SD Memory Card, 2 Gbyte | R&S HA-Z232 | 1309.6223.00 | |
GPS receiver | R&S HA-Z240 | 1309.6700.03 |
R&S ZVH Cable and Antenna Analyzer optional probes:
<<<<提醒:左右滑动表格>>>>name (of a thing) | Model number | part numbers |
Spare USB cable | R&S HA-Z211 | 1309.6169.00 |
Spare LAN cable | R&S HA-Z210 | 1309.6152.00 |
Spare AC Adapter | R&S HA-Z201 | 1309.6100.00 |
Spare CD-ROM containing R&S ZVHView software and documentation | R&S ZVH-Z45 | 1309.6946.00 |
Printed Quick Start Guide for R&S ZVH, English | R&S ZVH-Z46 | 1309.6900.12 |
Printed Quick Start Guide for R&S ZVH, German | R&S ZVH-Z47 | 1309.6900.11 |
R&S ZVH-K9Power Probes Supported by Option (Average Power Measurement) | ||
Power Probe, 200 pW to 200 mW, 10 MHz to 8 GHz | R&S FSH-Z1 | 1155.4505.02 |
Power Probe, 200 pW to 200 mW, 10 MHz to 18 GHz | R&S FSH-Z18 | 1165.1909.02 |
Directional power probe, 30 mW to 300 mW, 25 MHz to 1 GHz | R&S FSH-Z14 | 1120.6001.02 |
Directional Power Probe, 30 mW to 300 W, 200 MHz to 4 GHz | R&S FSH-Z44 | 1165.2305.02 |
USB adapter cable for R&S FSH-Z1/-Z18, length: 1.8 m | R&S FSH-Z101 | 1164.6242.02 |
Adaptor cable R&S FSH-Z129 for R&S NRP-Z8x | R&S FSH-Z129 | 1304.5887.00 |
USB adapter cable for R&S FSH-Z14/-Z44, length: 1.8 m | R&S FSH-Z144 | 1145.5909.02 |
Universal Power Probe 2), 200 pW to 200 mW, 10 MHz to 8 GHz | R&S NRP-Z11 | 1138.3004.02 |
Universal Power Probe 2), 200 pW to 200 mW, 10 MHz to 18 GHz | R&S NRP-Z21 | 1137.6000.02 |
Universal Power Probe 2), 2 nW to 2 W, 10 MHz to 18 GHz | R&S NRP-Z22 | 1137.7506.02 |
Universal Power Probe 2), 20 nW to 15 W, 10 MHz to 18 GHz | R&S NRP-Z23 | 1137.8002.02 |
Universal Power Probe 2), 60 nW to 30 W, 10 MHz to 18 GHz | R&S NRP-Z24 | 1137.8502.02 |
Universal Power Probe 2), 200 pW to 200 mW, 10 MHz to 33 GHz | R&S NRP-Z31 | 1169.2400.02 |
Broadband Power Probe 2), 1 nW to 100 mW, 50 MHz to 18 GHz | R&S NRP-Z81 | 1137.9009.02 |
Thermal Power Probe 2), 1 μW to 100 mW, DC to 18 GHz | R&S NRP-Z51 | 1138.0005.02 |
Thermal Power Probe 2), 1 μW to 100 mW, DC to 40 GHz | R&S NRP-Z55 | 1138.2008.02 |
Thermal Power Probe 2), 300 nW to 100 mW, DC to 50 GHz | R&S NRP-Z56 | 1171.8201.02 |
Thermal Power Probe 2), 300 nW to 100 mW, DC to 67 GHz | R&S NRP-Z57 | 1171.8401.02 |
Average Power Probe 2), 200 pW to 200 mW, 9 MHz to 6 GHz | R&S NRP-Z91 | 1168.8004.02 |
Average Power Probe 2), 2 nW to 2 mW, 9 kHz to 6 GHz | R&S NRP-Z92 | 1171.7005.02 |
USB adapter (active) for connecting the R&S NRP-Zxx power probe to the R&S ZVH | R&S NRP-Z4 | 1146.8001.02 |