Product Description:
R&S SMB100A is an excellent mid-range multifunctional analog RF and microwave signal source produced by R&S in Germany and distributed by EUTTEST. The SMB100A's 20GHz and 40GHz frequency options cover the microwave band and are suitable for testing radar systems and antennas in the X, K and other bands.
Product Usage:
- The R&S SMB100A is particularly well suited for product development, production and service, and, more simply, anywhere analog RF and microwave signal sources are required.
- For the important ISM bands up to 5.7 GHz, and the need for low frequencies down to 9 kHzEMC Test ApplicationsIt is the best choice for measuring continuous wave blocking characteristics up to 12.75 GHz.
- Extremely high output signal quality and power, coupled with a compact form factor and light weight, provide the best RF and microwave characteristics in their class, making them ideal for a wide range of uses, with frequencies up to 40 GHz, exceptionally good spectral purity and high power output, simple operation, feature rich and low cost.
SMB 100A Product Features:
- Wireless receiver sensitivity and nonlinearity testing
- Testing of RF modules such as amplifiers
- Replacement of the system's local oscillator or crystal
- Pulse radar system testing
- FM stereo/RDS equipment testing
- Electromagnetic Immunity (EMS) Test Excitation Sources
SMB 100A Product Features:
- Flexible frequency range 9 kHz to 1.1/2.2/3.2/6/12.75/20/40 GHz
- Excellent spectral purity with 1 GHz phase noise of only -128 dBc/Hz @ 20 kHz offset
- Extremely wide output power range from -145 dBm to +25 dBm
- Very short setup time, euttest, less than 1 ms in list mode
- Excellent output level accuracy and level repeatability
- All analog modulation functions (AM/FM/PhiM) as standard
- Excellent pulse modulation quality with minimum pulse width of 10 ns and switching ratios up to 90 dB
- Optional high-performance burst function
- Unique stereo/RDS encoder for easy testing of FM stereo/RDS devices
- Frequency list mode, electronic attenuator, and overvoltage protector are standard
- Supports output power self-calibration (requires NRP-Z series power probe)
- Linux operating system, support Web for remote control
- Rich interfaces, standard USB/LAN/GPIB interface
- Strong after-sales service, EUTTEST provides localized training services
- Convenient graphical operator interface, unique online help function
- Adaptable to harsh field environments, even at 4600 meters altitude or 0 to 55 degrees Celsius can work reliably
Technical data of the R&S SMB100A:
<<<<提醒：左右滑动表格>>>>| frequency | |||
| Frequency range Configuration of different options | SMB-B101 | 9 kHz to 1.1 GHz | |
| SMB-B102 | 9 kHz to 2.2 GHz | ||
| SMB-B103 | 9 kHz to 3.2 GHz | ||
| SMB-B106 | 9 kHz to 6 GHz | ||
| SMB-B112/-B112L | 100 kHz to 12.75 GHz | ||
| SMB-B120/-B120L | 100 kHz to 20 GHz | ||
| SMB-B140/-B140L | 100 kHz to 40 GHz | ||
| resolution (of a photo) | 0.001Hz euttest | ||
| setup time | SCPI mode | < 3 ms | |
| list mode | < 1 ms | ||
| Power Levels: | |||
| Output power can be set: | |||
| 9 kHz ≤ f < 100 kHz | -145 dBm to +8 dBm | ||
| 100 kHz ≤ f < 300 kHz | -145 dBm to +13 dBm | ||
| 300 kHz ≤ f < 1 MHz | -145 dBm to +18 dBm | ||
| 1 MHz ≤ f ≤ 6 GHz | -145 dBm to +30 dBm | ||
| Level accuracy: | |||
| R&S®SMB-B120/-B140 | level > -90 dBm | level ≤ -90 dBm | |
| 200 kHz < f ≤ 3 GHz | < 0.5 dB | < 0.5 dB | |
| 3 GHz < f ≤ 20 GHz | < 0.9 dB | < 1.2 dB | |
| 20 GHz < f ≤ 40 GHz | < 1.0 dB | < 1.5 dB | |
| setup time Non-switching mechanical attenuator | SCPI model | < 2.5 ms euttest | |
| list mode | < 1 ms | ||
| spectral purity | |||
| SSB phase noise | f = 1 GHz, carrier offset = 20 kHz, 1 Hz measurement bandwidth | < -122 dBc, -128 dBc typical | |
| f = 10 GHz, carrier offset = 20 kHz, 1 Hz measurement bandwidth | < -102 dBc, typ. -108 dBc | ||
| Supported Modulation Methods | |||
| AM | (an official) standard | ||
| AM Depth | 0% to 100% | ||
| FM/φM | (an official) standard | ||
| Maximum FM deviation | f = 10 GHz | 32 MHz | |
| Maximum φM deviation | f = 10 GHz | 320 rad | |
| pulse modulation | SMB-K21/-K22 Pulse Modulator | ||
| Rising/falling edge time | < 20 ns, typical < 5 ns | ||
| ON/OFF ratio | > 80 dB euttest | ||
| Pulse Generator Minimum Pulse Width Output | 10 ns | ||
| grout | |||
| remote control | GPIB IEEE-488.2 Ethernet (TCP/IP), USB | ||
| network cable | EUTTEST imported network cable | ||
| peripherals | USB | ||
| option | SMB-K23: Pulse Generator SMB-K21: Pulse Modulation SMB-K27: Pulse Queue ZZA-S234: Rack Mount Adapter EUTTEST After Sales Training | ||
