Introduction：
The R&S FSVA3000 is a signal and spectrum analyzer for 5GNR testing manufactured by R&S in Germany. The FSVA3000 is distributed by EUTTEST in Shenzhen and features a 1 GHz analysis bandwidth, excellent phase noise (< -127 dBc at 10 kHz offset (1 Hz)), and a high dynamic range for all the requirements of demanding measurement applications such as 5GNR measurements. NR measurements and other demanding measurement applications. High-speed testing and an advanced operating concept make this the ideal instrument for challenging signal analysis tasks in the laboratory and in the field of⽣.
The R&S FSVA3000 is a replacement upgrade for the R&S FSVA.
FSVA3000 Serial Product General Technical Data:
<<<<提醒：左右滑动表格>>>> | Resolution bandwidth | 1 Hz - 10 MHz |
| RRC Filter | 18 kHz (NADC), 24.3 kHz (TETRA), 3.84 MHz (3GPP), 4.096 MHz |
| I/Q Demodulation Bandwidth | 100 Hz - 5 MHz Expandable bandwidth to 600MHz by contacting EUTTEST |
Product Features:
- Extending the frequency range to 325 GHz with external harmonic mixers from Rohde & Schwarz
- DANL at 1 GHz: -153 dBm
- DANL at 1 GHz with optional preamplifier: -167 dBm
- Measurement applications for analog and digital signal analysis, including 5GNR
- User interface with multi-touch display, SCPI logger and event-based operation
- R&S FSVA3-K144 (downlink) and R&S FSVA3-K145 (uplink) options
More analysis bandwidth
- Modern communication signals require ever larger bandwidths. With an analysis bandwidth of 1 GHz, the R&S®FSVA3000 sets new standards in its class. It allows the simultaneous capture of 10 consecutive 5G NR component carriers. This saves measurement time and makes it possible to analyze the interactions between carriers and time. 1 GHz bandwidth can be used for the maximum frequency of the corresponding analyzer model, e.g. 44 GHz. The R&S®FSVA3000 has an excellent dynamic range, which is not only beneficial for spectral measurements.
- It can also be used to analyze and demodulate signals with high crest factors, such as OFDM signals or signals with high modulation steps. For 320 MHz wide WLAN signals, excellent EVM values better than 1% can be achieved
- 2.4 GHz or 5.8 GHz, also for 5G NR signals at 28 GHz. This increases the margin of the DUT as it minimizes errors introduced by the measurement instrument.
Supports all modern wireless standards
The R&S FSVA3000 offers signal analysis options for all modern wireless and cellular communication standards , i.e.:
- 3GPP 5G NR
- EUTRA/LTE/LTE-Advanced
- NB-IoT downlinks
- WCDMA
- GSM/EDGE/EDGE Evolution
- Wireless LAN IEEE 802.11a/b/g/n/p/ac/ax/be
- Bluetooth® Basic Rate/Enhanced Data Rate/Low Power Consumption
FSVA Sequence Spectrum Analyzers include the following models in a number of different frequencies:
The FSVA3000 consists of the following product models with different available frequencies, which can be purchased from EUTTEST to extend the frequency range from 10 Hz-54 GHz:
- R&S FSVA3004 10 Hz - 4 GHz
- R&S FSVA3007 10 Hz - 7.5 GHz
- R&S FSVA3013 10 Hz - 13.6 GHz
- R&S FSVA3030 10 Hz - 30 GHz
- R&S FSVA3044 10 Hz - 44 GHz
- R&S FSVA3050 10 Hz - 50 GHz
- With R&S FSV3-B54G option 10 Hz - 54 GHz
Optional accessories for FSVA3000 serial products.
<<<<提醒：左右滑动表格>>>> | Option Model | measured parameter | measurement function |
| R&S FSV3-K6 Pulse Measurement | Pulse Parameters:- Timing: pulse width, pulse repetition interval, duty cycle
Cycle time, rise/fall time, build time, timestamp, shutdown time - Frequency: carrier frequency, inter-pulse frequency difference, chirp rate, frequency deviation, frequency error
- Power: peak power, average power, peak-to-average power
Power Ratio, Pulse Power Ratio - Phase: carrier phase, inter-pulse phase difference,
Phase Deviation, Phase Error - Amplitude: sag, ripple, overshoot width, top/
Basic power, average on-state power, average transmit power, min/peak power, peak-to-average/peak-to-minimum power ratio, pulse-to-pulse power ratio | - Pulse point measurements: frequency, amplitude, phase vs. pulse, trend plots and histograms of all parameters
- Impulse statistics: standard deviation, mean,
Maximum, Minimum - Pulse meter
- User-defined measurement parameters
|
| R&S FSV3-K7 Modulation analysis of AM/FM/PM modulated single carriers | - Modulation Depth (AM)
- Frequency Deviation (FM)
- Phase Deviation (PM)
- Modulation Frequency
- THD and SINAD
- carrier power
| - Autofocus Spectrum
- radio frequency spectrum
- AF range display
- Autofocus filters (low pass and high pass)
- Weighted filters (CCITT)
- EUTTEST, suppression
|
| R&S FSV3-K8 Bluetooth® Basic Rate/Enhanced Data Rate/Low Power Measurements | - Packet Type
- Packet length
- Output Power
- Incremental frequency (Δf)
- Frequency Drift
- International Finance and Trade Commission
| - radio frequency spectrum
- RF envelope
- horoscope
- Demodulation Waveform
- notation
|
| R&S FSV3-K18 Amplifier Measurement R&S FSV3-K18D Direct DPD measurements R&S FSV3-K18F Frequency Response and Group Delay R&S FSV3-K18M Memory polynomial DPD | - AM/AM, AM/PM, EVM
- Width of AM/AM and AM/PM curves
- Amplitude, phase and group delay versus frequency
(R&S®FSV3-K18F) - Polynomial coefficients (R&S®FSV3-K18)
- Memory polynomial coefficients (R&S®FSV3-K18M)
| - General Purpose Amplifier Measurements
- Polynomial-based digital pre-distortion
(R&S®FSV3-K18) - Direct digital pre-distortion (R&S®FSV3-K18D)
- Memory Polynomial Pre-Distortion (R&S®FSV3-K18M)
- Control and synchronization of external signal generators such as the R&S®SMBV100B vector signal generator
- Characterization of the dynamic behavior of two-port devices
- Real-time memory DPD (using Hammerstein model) (R&S®FSV3-K18M)
|
| R&S®FSV3-K30 Noise figure and gain measurements based on the Y-factor method | - Noise Coefficient
- Noise Temperature
- attainment
- Y factor
| - Analyzer noise correction (second stage correction)
- Measurement of variable frequency DUTs
- Controlling the generator as an LO in frequency conversion measurements
- SSB and DSB
|
| R&S®FSV3-K40 Phase Noise Measurement | - SB phase noise
- Residual FM and Residual PM
- judder
| - 1 Hz to 10 GHz offset range
- Selects the resolution bandwidth and the average value for each offset range.
- Definable evaluation range for residual FM/PM
- Signal. Tracking.
- Optional suppression of spurious emissions
|
| Measurement Applications | measured parameter | measurement function |
| R&S®FSV3-K54 EMI Measurement | EMI Diagnostics and Pre-Conformance Measurements Complies with commercial and military standards: - Interference Voltage
- Interference Power
- radiation interference
| - EMI Detector and Resolution Bandwidth Compliance
CISPR 16-1-1, MIL-STD-461 and DO-160 - Limit linebanks specified in the latest EMI standards
- Test automation and reporting for fast and repeatable measurements
- Sensor coefficients for antennas, cables, LISNs, etc.
- Support for R&S ELEKTRA EMC test software
|
| R&S FSV3-K60 Series Transient Measurement R&S FSV3-K60C Transient linear FM measurements R&S FSV3-K60H Transient Jump Measurement R&S FSV3-K60P Transient Phase Noise Measurement | - FH signals: dwell time, stabilization time, switching time, frequency deviation, power, phase deviation, power ripple
- Chirp signals: frequency deviation, chirp onset, chirp length, chirp rate, chirp state deviation, phase deviation, power, power ripple
| - Spectrograms and Spectrogram Sections, Tabular Display, Frequency, Frequency Error, Phase and Amplitude vs. Time, FFT Spectra
- Pan and zoom functions, use touch gestures to select the analysis area; support for spectrograms, frequency domain and time domain tracking displays
- phase noise
- Frequency and phase deviation spectrograms
- Trend plots and histograms for all parameters
- Chirp and jump statistics: standard deviation, mean,
Maximum and minimum values - User-defined measurement parameters
|
| R&S®FSV3-K70 Vector Signal Analysis R&S®FSV3-K70M Multi-modulation Analysis R&S®FSV3-K70P BER PRBS Measurements | Analysis of digitally modulated single carriers Refinement in place level: - EVM (Evaluation Module)
- Mel (name)
- Phase Error
- amplitude error
- carrier frequency error
- Symbol rate error
- I/Q Skew
- rho (Greek letter Ρρ)
- I/Q offset, I/Q imbalance, quadrature error
- Amplitude Down
- exercise
- Known BER of the data stream
- BER of the bitstream generated using PRBS
Shift Register (R&S®FSV3-K70P) - Analyzing vector signals with multiple vector modulation signals
Modulation, e.g. DVB-S2(X) (R&S®FSV3-K70M) | - eye chart
- star chart
- vector graphics
- bar chart
- equalizer
- Multiple modulation formats, for example:
- 2FSK to 64FSK
- MSK, GMSK, DMSK
- Multiple PSKs
(e.g. BPSK, QPSK, 8PSK, 3π/8-8PSK EUTTEST, etc.) - 16QAM to 1024QAM
- 16apsk (dvb-s2), 32apsk (dvb-s2), 2ask, 4ask
- User definable constellations
|
| R&S FSV3-K96 OFDM signal analysis | Customized OFDM signal analysis:- EVM (pilot, data, pilot and data)
- EVM with Carrier and Symbol
- frequency error
- Sampling Clock Error
- I/Q Offset
- Gain imbalance
- Orthogonal Error
- Power versus time
- power spectrum
- Power and Carriers and Symbols
- Channel flatness
- group delay
- impulse response
- bitstream
| - star chart
- China Self-Directed Fund
- Channel estimation and compensation using phase, timing, and level tracking
- Configuration File Wizard
- Free configuration of FM and data carriers and modulation schemes
|
More options for FSVA3000 Contact us for more information.
Service
Our company sells all the instrumentation equipment products provide after-sales personnel door-to-door training or telephone, e-mail, microblogging and other ways of installation and training services.
We are committed to supplying equipment that is brand new and manufactured by the original manufacturers at home and abroad.
After-sales of the product is carried out by the after-sales policy provided by the original equipment manufacturer.
Purchase
The EUTTEST website does not sell any products online and is only used to display information about the products that our company represents and sells or researches in-house.
The prices shown are for display purposes only, please contact our sales staff to get the real-time quotation information of the required instruments and equipment products;
When you confirm your purchase, we will contact you to sign a purchase and sales contract.
Our company only deals with companies and provides formal Chinese VAT special invoices.
