Product Description:
The BBL200 is a liquid-cooled broadband amplifier for applications requiring high RF power, manufactured by R&S and distributed by EUTTEST.The R&S BBL200 broadband amplifier series produces 3kW, 5kW, and 10kW of power in the frequency range of 9kHz to 225MHz. The amplifiers have a liquid-cooled solid-state design, are highly ruggedized and are highly efficient and noise-free. Accurate monitoring of all runtime parameters ensures maximum robustness and reliability.
offeringsFeatures:
- Frequency range from 9 kHz to 225 MHz
- 3000W, 5000W and 10000W output power
- 100% Mismatch Tolerance
- Specially designed for continuous operation even under mismatch conditions
- Liquid-cooled, compact and silent
- Suitable for amplitude, frequency, phase and pulse modulation
- Global service network and global spare parts availability
- Class A amplifier
- The R&S BBL200 covers open source software packages. Copies of the respective licenses are included in the "Open Source Confirmation", which can be found in the downloads/firmware section of this web page.
offeringsAdvantage:
- One of the most advanced high power amplifiers on the market
- Sophisticated RF design
- Liquid-cooled design, small and compact
- mass produce
- Reliability due to high availability
- Deep expertise in amplifier development
- Cost advantages due to short downtime
- Reliable performance even under mismatch conditions
- Flexible control and operation
- manual operation
- Local and remote operation via web browser and PC
- Ethernet or GPIB remote control
- integrate intoR&S EMC32 EMC Measurement Software
- Two different interlocks for high security levels
- Easy to repair and quick maintenance
- EUTTEST's outstanding service concept
- Extended warranty designed to maximize investment protection
- From pre-sales support to after-sales service, Shenzhen offers services.
R&S BBL200 Sequence Power Amplifier Optional Models:
<<<<提醒:左右滑动表格>>>>R&S BBL200 Single Band Power Amplifier | ||
Frequency band (9kHz to 225MHz) | ||
3000W, Liquid Cooled‑, 31HU Rack Model | R&S®BBL200 | BBL200-A3000 |
5000W, Liquid Cooled‑, 42HU Rack Model | R&S®BBL200 | BBL200-A5000 |
10,000W, liquid-cooled‑, 2x42HU rack models | R&S®BBL200 | BBL200-A10000 |
Included accessories: EUTTEST service guide, rack power cord, printed and CD manuals, test report, indoor heat exchanger, 2 x 20m cooling hoses and filling pump. |
- R&S®BBA-B101:
- GPIB Remote Control
- R&S®BBA-B132:
- DC blocking input protection (N)
- R&S®BBL-B140:
- RF Forward/RF Reflective Sampling Port (Type N)
- Bottom rear panel connector for 3000W and 5000W models
- R&S®BBL-B140:
- RF Forward/RF Reflective Sampling Port (Type N)
- Bottom rear panel connector for 10000W models, top rack connector for all models
- R&S®BBL-B141:
- Detect Positive/Detect Reflective Sampling Port (N-Type)
- R&S®BBL-B160:
- Transparent I/O
- R&S®ZR1-RW01:
- Rack rollers
R&S BBL200 Serial High Field Strength Power Amplifier Technical Data:
<<<<提醒:左右滑动表格>>>>RF data | ||
Frequency range | 9kHz to 225MHz asynchronous | |
Nominal output load | 50Ω | |
nominal power | 3000W (64.8dBm), 5000W (67dBm), 10000W (70dBm) | |
modulation capability | AM, FM, φM, PM | |
Nominal Power Gain | 3000W model | 68.2dB |
5000W model | 70.4dB | |
10000W Model | 73.4dB | |
Gain Flatness | ±3.0dB | |
Gain adjustment range | >15dB | |
harmonic (wave with frequency an integer multiple of the fundamental) | 3000W model Between 9kHz and 110MHzeuttest at 3000W Between 110MHz and 225MHzeuttest at 2800W | <-20dBc |
5000W model 9kHz to 110MHz at 5000W 110MHz to 225MHz at 3500W | <-20dBc | |
10000W Model 9kHz to 110MHz at 10,000W 110MHz to 225MHz at 8000W | <-20dBc | |
stray | Carrier bias >100kHz | -80dBc (nominal), -70dBc max. |
coefficient of noise | 9kHz to 50MHz | <16.0 dB (nominal) |
50MHz to 225MHz | <9.0 dB (nominal) | |
Nominal Input Impedance | 50Ω | |
Input level corresponding to nominal output power | -3.4dBm | |
Input VSWR | to 50Ω | Maximum 2:1 |
Maximum Input Level | a radio frequency | +5dBm |
direct current (D.C.) | 0V | |
Nominal Output Impedance | 50Ω | |
Positive Output Power | At VSWR<6:1 | Sustained, no turnaround |
At VSWR>6:1 | Continuous, progressive foldback is an approximation of the output power of the 50%, depending on the phase and amplitude of the mismatch | |
Output Adaptation Protection, VSWR | 100%, non-destructive | |
RF sampling as well as detected RF sampling signals | ||
RF Sampling Signal Coupling Factor | RF forward and reflection sampling port, euttest optional | Approx. 70dB (see test report for details) |
Sampled signal level detected | Forward and reflective sampling ports for detection, euttest optional | 0.1V to 3.0V DC |
Mechanical specifications of the amplifier system | ||
size | Rack mounting, W×H×D, with handle, column and lifting support | |
3000W model | 600mm×1570mm×1150mm (23.62in x 61.81in x 45.28in) | |
5000W model | 600mm×2050mm×1150mm (23.62in x 80.71in x 45.28in) | |
10000W Model | 1200mm×2050mm×1150mm (47.24in x 80.71in x 45.28in) | |
Mechanical specifications for heat exchangers | ||
size | W×H×D, including handle and column | |
3000W model | 1241mm×558mm×400mm (48.86in x 21.97in x 15.75in) | |
5000W model | 1125mm×925mm×600mm (44.29in x 36.42in x 23.62in) | |
10000W Model | 2400mm×1150mm×600mm (94.49in x 45.27in x 23.62in) | |
connector | ||
Connection plate located at the bottom of the top cover or rear panel of the frame | RF Input Port | N Female Connectors |
Sampling port for RF or detected RF | N Female Connectors | |
Ethernet | RJ-45 | |
interlock | WAGOX-COM®, 7‑pin, female connector | |
amplifier status | WAGOX-COM®, 7‑pin, female connector | |
Transparent I/O, optional | 2×WAGOX-COM®, 7‑pin, female connector | |
RF output port | Rear Plate, Bottom | 15/8″ EIA Female Connector |
power supply (of an appliance etc) | Rear Plate, Bottom | |
3000W model | 5×4mm2power cable (of an appliance etc) | |
5000W model, 10000W model | 5×35mm2power cable (of an appliance etc) | |
Coolant supply | Rack top cover, rear panel or rack shelf | |
Electrical specifications for amplifier systems | ||
Nominal operating voltage range | 380V to 415V AC ±10%, three-phase (with N-type connector). 50Hz to 60Hz ±6% | |
208V to 240V AC ±10%, three-phase. 50Hz to 60Hz ±6% | ||
nominal current | 3000W model, 230V, according to phase | <20.5A |
5000W model, 230V, according to phase | <35A | |
10000W model, 230V, according to phase | <72A | |
nominal power | 3000W Model, RFcw= 3000W (RMS), VSWR = 1 | <14.2kVA |
5000W Model, RFcw= 5000W (RMS), VSWR = 1 | <24kVA | |
Model 10000W, RFcw= 10000W (RMS), VSWR = 1 | <50kVA | |
Electrical specifications for heat exchangers | ||
Nominal operating voltage range | 230V AC ±10%, single phase. 50Hz to 60Hz ±6% | |
Current (at 230V) | 3000W model | <1.5A |
5000W model | <3.5A | |
10000W Model | <13A | |
power wastage | 3000W model | <350VA |
5000W model | <810VA | |
10000W Model | <3000VA | |
Cooling specifications | ||
cooling circuit | Closed cooling system with automatic pressure equalization | |
coolant | 39%v/v Frost Resistant®N (based on monoethylene glycol, water and anticorrosion additives) | |
heat exchangers | quantitative (science) | |
3000W model | Maximum 9.5kW | |
5000W model | Maximum 15.7kW | |
10000W Model | Maximum 41kW | |
air flow | ||
3000W model | 6200m3/h | |
5000W model | 5145m3/h | |
10000W Model | 20100m3/h | |
Installation type | Indoor or outdoor, floor installation | |
between the amplifier system and the heat exchanger Recommended Distance | Tube length | Maximum 2×20m |
altitude difference | Maximum 20m | |
Cooling hoses | external diameter (including thickness of the wall) | |
3000W model | 2×40mm (2×1.57in) | |
5000W model, 10000W model | 2×51mm(2×2.0in) | |
bending radius | 280mm(11in) | |
graphical user interface (GUI) | ||
local monitor | 200 x 48 pixels, monochrome | |
WebGUI | Via Ethernet | RJ-45, 10/100Mbit/s, auto-negotiation, half/full duplex |
remote control | ||
Ethernet cable | RJ-45, 10/100Mbit/s, auto-negotiation, half/full duplex,EUTTEST imported cable | |
environmental conditions | ||
Temperature load | Operating Temperature Range | 0°C to +40°C |
Storage temperature range | -20°C to +70°C | |
athlete's foot | Up to +40°C at 95% relative humidity. uncompensated | |
high degree | Operating height | Up to 2000m |
Storage height | Up to 4600m | |
safeguard | ||
Load VSWR | finite | |
interlock | 1 device interlock, 1 configurable interlock | |
Input protection against bias voltage | selectable | DC blocking level ≤ 50V DC |
Transient Voltage Compatibility | Class II according to IEC 60364-4-443 | |
Internal fuse exchange capacity | <10kA | |
thermal overload | Shutdown on thermal overload (+50°C ambient temperature) | |
pressure overload | Pressure reducing valve, 5 bar | |
module switching | self-closing valve |
All specified parameters are valid at an ambient temperature of +25°C, an input impedance of 50Ω, and an output impedance of 50Ω.