Introduction:
The RF-U Model 2.5-2 Magnetic Field Probe is a near-field probe for detecting RF currents in wires, component pins, SMD assemblies and integrated circuit pins. This probe has an approximately 0.5mm wide magnetic field sensitive notch at the tip, which is placed on the test object during testing.
The magnetic field probes RF-U 2.5-2 (30MHz-3GHz) are part of the langer emv range. RF1 set This is a magnetic near-field probe that cannot be purchased separately, please contact EUTTEST for advice.

Operating Principle Diagram of RF-U 2.5-2
The RF-U 2.5-2 is a passive near-field probe similar in function to the RF-U 5-2 probe, but designed for use with SMD components (pins). The near-field probe is small and convenient. It has a current attenuation slot, the upper part of which is electrically shielded. It can be connected to a spectrum analyzer or an oscilloscope with a 50 Ω input. The magnetic field probe does not have a 50 Ω internal termination resistor.
Technical parameters:
<<<<提醒:左右滑动表格>>>>Probe Model | RF-U 2.5-2 |
manufacturer | Germany langer emv Distributed by EUTTEST |
be attributed | RF1 SET |
Frequency range | 30MHz-3GHz |
resolution (of a photo) | 0.5mm |
Probe Size | Ø ≈ 4 mm |
output interface | SMA mother |
Frequency characteristics [dBµV] / [dBµA/m] | ![]() Frequency characteristics of RF-U 2.5-2 [dBµV] / [dBµA/m] |
Magnetic field correction curve [dBµA/m] / [dBµV] | ![]() Magnetic field correction curve for RF-U 2.5-2 [dBµA/m] / [dBµV]. |
Current Correction Curve [dBµA] / [dBµV] | ![]() Current Correction Curve for RF-U 2.5-2 [dBµA] / [dBµV] |