Introduction：
The PT4 set is a burst transformer produced by langer-emv and distributed by EUTTEST. The PT4 set is designed for efficient immunity analysis of components and equipment. The PT4 Burst Transformer converts the pulses generated by the Burst / EFT generator into potential-free pulse trains. These bursts are fed segment by segment to the test object, thus limiting the sensitive area on the test object.The PT4 set consists of a magnetic field source and an electric field source, both of which are fed by the EFT/pulse burst generator. The field lines emitted by the field source probe allow sampling of the surface of the test object so that weak points can be precisely located; these weak points can also be corresponded to standardized graphical deviations during the test. The connection cable between the burst transformer and the probe is supplied with a SHV plug (HV SHV-SMB 1m) or a Fischer plug (HV-FI-SMB 1m), please specify the type of purchase at the time of purchase.
PT4 set for use with external EFT pulse train generator
Technical parameters：
<<<<提醒：左右滑动表格>>>>| Device name | PT4 Burst Transformer |
| output voltage | 4.5 kV |
| conversion factor | 1:1 |
| Output voltage strength | 500 V / DC, AC 50 Hz |
| BS 04DB-h Magnetic Field Source Probe Dimensions | 1 mm - 3 mm |
| ES 05D-h Electric Field Source Probe Size | PCB Alignment |
Boxing list for PT4 set:
1x PT4, Burst Transformer
1x BS 04DB-h, magnetic field source
1x ES 05D-h, electric field source
1x HV SHV-SMB 1 m (PS)
1x PT4 acc 1x PT4 case
1x PT4 m, PT4 Series Operating Instructions
PS: Different test cables need to be selected to match different brands of pulse generators:
EMTEST Pulse Group Generator: HV FI-SMB 1 m, SMB high voltage cable
Contact EUTTEST for more information.
A brief description of each probe inside the PT4 set:
Brief description of each probe inside the PT4 set
