summary
P602 is a 0.1Ω high-frequency current probe manufactured by langer-emv in Germany and distributed by EUTTEST. P602 is a 0.1Ω probe for direct measurement of high-frequency currents on IC pins. Its internal resistance is very small, so the measurement error is smaller than that of the P603 type ammeter. For measurement, connect it to the power pin (Vdd/Vss) or signal pin.
P602 Test Application:
The P602 is used to directly measure high-frequency (RF) currents on the pins of IC integrated circuits and is mainly used toPower pins (Vdd/Vss) and signal pinsThe P602 has pin contacts to reach and make measurements on each pin of the IC. The P602 has pin contacts to reach and make measurements on every pin of the IC.
P602 Test System Contact IC Pin Test Chart
P602 Main technical parameters:
<<<<提醒：左右滑动表格>>>>| Frequency range | 9kHz-3GHz |
| Capacity of coupling capacitor | 8µF |
| measured output | 50Ω, SMB |
| Voltage transfer coefficient | -6dB |
| Ammeter | |
| act on behalf of sb. in a responsible position | EUTTEST |
| Shunt D = resistance | 0.1Ω |
| Current Correction Factor Typical | -26dBΩ |
| inductors | 1nH |
| Maximum power loss | 2.5W |
Parametric Chart for P602
P602 Current correction factor
Equivalent Circuit Diagram of P602 Tested on IC Pins
P602 Integrated Circuit Test System Configuration Chart
P602 Detailed Configuration Contact EUTTEST for more information.
