Introduction:
The OSE 150-1 set is a fiber optic receiver manufactured by langer-emv in Germany and distributed by EUTTEST that can transmit digital signals without power at 50 Mbps to an external oscilloscope for display and analysis.
Component Description:
OE 150An optical receiver of type S21 receives the optical signals from the sensors and delivers them in the form of electrical signals to an oscilloscope or counter via a BNC type connector. The receiver can be used with sensors types S21, S31 and S32 as well as burst sequence detectors types BS 01B, BD 01E and BD 06B to capture the burst process.
S25 The type transducer is a digital probe that transmits digital signals from the test equipment without reaction during a burst sequence test. It is used by attaching it to the circuit board of the test equipment and is powered by the test equipment. The digital signal is converted to an optical signal in the transducer and transmitted via fiber optics to a receiver or oscilloscope.
Technical parameters:
<<<<提醒:左右滑动表格>>>>OE 150 Optical Receiver | |
Transmission range | DC-50 Mbps |
optical interface | Ø 2.2 mm |
Supply Voltage | 12 V / 100 mA |
length of light | 1 m - 20 m |
output interface | BNC-Stecker, 5 V HCMOS |
S25 Optical Sensor | |
Transmission range | DC ... 50 Mbps |
optical interface | Ø 2.2 mm |
Supply Voltage | 3 V ... 5 V |
Current Input | 30 mA |
OSE 150-1 set Packing List:
1x OE 150 , Optical Receiver
1x S25 , optical sensor (50 Mbps)
1x LWL Ø 2.2 mm 1.5 m , 1.5m Fiber Optics
1x NT FRI EU
1x OSE 150-1 acc
1x OSE 150-1 case
1x Digital m
Usage:

Use of the OE 150 with the E1 Anti-Jamming Development System and external oscilloscope

S25 Method of connecting chip pins