Product Description:
The NSG 4070B is a new product from AMETEK TESEQ to replace the NSG 4070. The new 4070B contains all the features of the 4070 with upgraded output power, and now the NSG4070B can be used for both radiated and conducted immunity testing from 9kHz to 1GHz. This product is distributed and serviced by EUTTEST, who will provide you with an EMC test system that complies with IEC/EN 61000-4-6, IEC/EN 61000-4-3, IEC/EN 61000-4-20, IEC/EN 61000-4-21, as well as a number of automotive electronics test standards.
NSG 4070B Product Features:
- Integrated signal generator 9 kHz to 1 GHz
- 3 power meter inputs 9 kHz to 1 GHz
- Integration of Class A power amplifier modules for different applications:
- 35 W, 150 kHz to 230 MHz.
- 45 W, 9 kHz to 1 GHz.
- 80 W, 150 kHz to 230 MHz
- Multiple EUT monitoring options
- 5,7-inch TFT color display
- Menu-based internal control software
- Basic remote control software including report generator
- Optocoupler Remote Control
Technical parameters：
The NSG 4070B from Teseq, an AMETEK-CTS company, has built-in RF signal generator, power amplifier, and power meter modules, each of which is listed below:
Signal generator module:
<<<<提醒：左右滑动表格>>>>| Product model | NSG 4070B |
| Product Brands | AMETEK - Teseq |
| agent | EUTTEST |
| RF frequency range: | 9 kHz to 1 GHz |
| Definition ratio: | 1 Hz |
| ageing | 25ppm |
| Reference Frequency: | Reference frequency output: 10MHz |
| RF level level range: | -60 dBm to +10 dBm |
| Resolution: | 0.1 dB |
| Setting time: | 10 ms |
| Modulation depth: | 0 - 100% |
| Modulation frequency range: | 1 Hz to 50 kHz |
| frequency resolution | 1 Hz |
| pulse modulation Rise/fall time (10%/90%): | < 1 µs |
| Modulation frequency range: | 1 Hz to 50 kHz |
| Frequency resolution: | 1 Hz |
| Duty Cycle: | 10% to 90% |
| external modulation Delay: | < 1 µs / 180° |
| Cycle: | Minimum 20 μs |
| Pulse width: | Minimum 10 µs |
Power meter module:
<<<<提醒：左右滑动表格>>>>| Frequency range: | 9 kHz - 1 GHz |
| Linear measurement range channel 1: Channels 2, 3 | -35 dBm to +27 dBm -45 dBm to +20 dBm |
| Maximum input/no damage Channels 1-3: | +28 dBm |
| Bottom noise: | >5dB |
| Input return loss: | >20 dB (below 500 MHz), >17 dB (500 MHz to 1 GHz) |
| Connectors: | BNC Socket, 50 Ω |
Power amplifier module technical parameters:
As you can see below, the NSG 4070B has an overall increase in output power over the NSG 4070, so you can just as easily choose from the three different NSG4070B configurations in the table below, depending on output power. And contact EUTTEST for quote information.
NSG 4070B-35
Combined immunity test system NSG 4070B, 9 kHz - 1 GHz RF generator and power meter (euttest 35 W module 150 kHz - 230 MHz)
NSG 4070-45
Combined immunity test system NSG 4070B, 9 kHz - 1 GHz RF generator and power meter (euttest 45 W module 9 kHz - 1 GHz)
NSG 4070-80
Combined immunity test system NSG 4070B, 9 kHz - 1 GHz RF generator and power meter (euttest 80W module 150 kHz - 230 MHz)
<<<<提醒：左右滑动表格>>>>| Model: | NSG 4070B-35 | NSG 4070B-45 | NSG 4070B-80 |
| Normal output power: | 35 W | 45 W | 80 W |
| Frequency range: | 150 kHz - 230 MHz | 9 kHz - 1GHz | 150 kHz - 230 MHz |
| Input Impedance: | 50 Ω | 50 Ω | 50 Ω |
| Output Impedance: | 50 Ω | 50 Ω | 50 Ω |
| Input return loss: | 10 dB minimum | 10 dB minimum | 10 dB minimum |
| Output return loss: | 9.5 dB normal minimum, 0 dB without damage | 9.5 dB normal minimum, 0 dB without damage | 9.5 dB normal minimum, 0 dB without damage |
| Gain: | 48 dB minimum | 50 dB minimum | 50 dB minimum |
| Gain Flatness: | Maximum +/-3 dB | Maximum +/-3 dB | Maximum +/-3 dB |
| Saturated output power: | 43 dBm minimum | 45 dBm minimum | 48.75 dBm minimum |
Output power graph of the power amplifier of NSG 4070B-35 (preliminary data)
In the above graph, from top to bottom: typical saturated power, typical linear power, specification saturated power, specification linear power
Contact EUTTEST for output power data for other models.
