Introduction:
NNLK 8130 is a LISN Linear Impedance Stabilization Network manufactured by Schwarzbeck, Germany and authorized to be sold by EUTTEST as an agent to test single-phase alternating current DUTs with a power line ground voltage of 250V and a current of 400A.
In the basic configuration, you can apply a maximum voltage of 250 V@50/60 Hz or 400 VDC between the line and ground of the 8130, and 400 V@50/60 Hz between the two lines.
If you configure the option "400/700 V" you can increase the maximum voltage between line and ground of the LISN to 400 V@50/60 Hz or 630 VDC, and the voltage between line and ground to 700 V@50/60 Hz.
Technical parameters:
<<<<提醒:左右滑动表格>>>>LISN Model | NNLK 8130 |
manufacturer | Schwarzbeck |
Device name | Three-phase artificial power network |
Available frequency | 150 kHz - 30 MHz |
impedance | 50 µH || 50 Ω |
Maximum EUT voltage | 250VAC 50/60 Hz 400 VDC (High pressure option can be added) 400 VAC 50/60 Hz 630 VDC |
connector | 16mm Terminal Block |
agent | Euttest.com |
Maximum EUT current | 4*400A |
RF connector | 50Ω BNC |
lengths | 448 mm |
height | 383 mm |
high degree | 605 mm |
quality | 30 kg |
option | High voltage power input and output + waterproof 400/700V option NNLK 8130 Opt. RC NNLK 8130 Option Hochstrom Opt. Lüfter. Opt. TC. |
Available Criteria | CISPR 16-1-2 |
Graphs related to the technical parameters of NNLK 8130:

Circuit schematic

S21 Curve Diagram

Impedance graph

phase portrait