Introduction:
NNHV 8123-400 is the latest 400A high voltage automotive electronic HV AN artificial network from Schwarzbeck, Germany, which complies with the standards of theCISPR 25 Ed. 4 and BMW GS 95025-1, which can beFor new energy automobile electronic parts testing needs, Shenzhen EUTTEST provides NNHV 8123-400 Product Quotation | Maintenance | Purchase | Technical Consulting Services.
Meets criteria:
- ISO 11452-4
- CISPR 25 ed4.0 latest version
- BMW GS 95025-1
- GB/T 18655-2018
CISPR 25 is a standard number that applies to any electronic/electrical component on vehicles, boats, and internal combustion engines used for testing radio nuisance testing of vehicles, trailers, and installations to protect adjacent receivers on board the vehicle in proper working order. The name of the standard is: Vehicles, boats and internal combustion engines Radio disturbance characteristics Limits and methods of measurement for the protection of on-board receivers Vehicles, boats and internal combustion engines-Radio disturbance characteristics -Limits and methods of measurement for the protection of on-board receivers
Our standard GB 18655 is the Chinese translated version of CISPR25.
Test application instructions:
The main application of the NNHV 8123-400 is the measurement of interference voltages in the HF-VHF range 0.1 MHz - 150 MHz using shielded cables for the testing of electric vehicle components according to the EMC test standard for automotive electronics: CISPR 25 Ed.4 version or BMW GS 95025-1.
Using this AN with our 50 Ω load terminals, it is also possible to perform BCI tests with high current injection. The impedance characterization circuit principle is 5 μH || 50 Ω and is realized by connecting the inductor in parallel with the input impedance of the measurement receiver.

Circuit Schematic for NNHV 8123-400
For testing, each NNHV 8123-400 needs to be mounted in a high voltage shielded box HVSE 8600 as per standard requirements, each AN can be used to measure a single path, so to be able to measure high voltage + and high voltage - bipolarity you would need to source two identical NNHV 8123-400s. The DUT EUT must be connected to the front panel terminals and the supply voltage must be connected to the rear panel.
Technical parameters:
<<<<提醒:左右滑动表格>>>>Models of HV AN | NNHV 8123-400 |
Device name | HV AN High voltage artificial network |
manufacturer | Schwarzbeck |
agent | Shenzhen EUTTEST |
Available frequency range | 0.1-150MHz |
Maximum continuous current | 250A |
Maximum current (short time) | 500A |
Maximum DC Voltage | 1000V |
Maximum AC 50/60Hz voltage | 700Vrms |
Maximum AC 400Hz voltage | 300Vrms |
impedance | 5 μH || 50 Ω Compliance with CISPR 25:2016 Edition 4.0 High Voltage LISN Requirements |
HV Cable | 4-15mm |
connector | N mother |
size | 220*225*260mm |
weight | 6 kg |
Shield Options | HVSE 8600 |
Technical parameter correlation curves:

EUT Port Impedance Curve for NNHV 8123-400

Voltage Separation Factor Graph for NNHV 8123-400

Maximum Operating Current Curves for NNHV 8123-400
other
We provide quotation and after-sale consulting service for NNBM 8124-200, if this equipment can not meet your requirements, please go to the following product page to choose more LISN and AMN that we sell.
LISN and AMN Schwarzbeck Options and Offers