Introduction:
NNBM 8124-400 is produced by Germany Schwarzbeck company and authorized by Shenzhen EUTTEST agent sales of automotive electronics special low-voltage artificial network AN, the LISN's continuous operation of the rated current value of 250 A, a short period of time more than 500 A is possible.
Test application:
The primary application of the NNBM 8124-400 is the measurement of interference voltages 0.1 ~ 150 MHz for vehicles, aircraft and ships in the HF-VHF range, and can also be used for Bulk Current Injection (BCI) testing or transient measurements according to ISO 7637-2. The impedance characteristics of the LISN are customized according to the requirements of the test standards CISPR 16-1-2 and CISPR 25 and the circuit principle.

Circuit Schematic for NNBM 8124-400
This automotive LISN has high voltage and current specifications and is ideal for electric vehicle (EV), hybrid drive, and on-board battery electronics testing, where automotive electronic components are connected to the wing terminals on the front panel and the power terminals are located on the back.
Technical parameters:
<<<<提醒:左右滑动表格>>>>AN Model | NNBM 8124-400 |
manufacturer | Schwarzbeck |
Frequency range | 0.1 - 110 (150) MHz |
Maximum continuous current | 250A |
Maximum current | 500A |
Maximum DC Voltage | 1000V |
Maximum 50/60Hz voltage | 400V |
Maximum 400Hz voltage | 300V |
agent | Euttest |
impedance | (5 µH + 1 Ω) || 50 Ω ±10 % |
weight | 6 kg |
size | 220 x 225 x 450 mm |
Meet the standard | CISPR 16-1-2, Annex D2,D3 CISPR 25 ISO 7637-2 Transients ISO 11452-4 BCI |
Graph of related technical parameters:

Impedance Curve for NNBM 8124-400

Transmission Divide Ratio for NNBM 8124-400

NNBM 8124-400 Effect of Temperature Variation
Other:
We provide quotation and after-sales consulting service for NNBM 8124-400, if this equipment can not meet your requirements, please go to the following product page to select more LISN and AMN that we represent.