Introduction：
LIN 100 set is a product produced by Langer EMV of Germany and distributed by EUTTEST of Shenzhen, the transmission mode is LIN bus 🡪 optical signal > LIN bus signal. Therefore, LIN 100 set can be used for critical LIN bus signal monitoring in darkroom or BCI testing, and the transmission of converted signals through optical fiber ensures that interference will not be carried to external monitoring equipment.
LIN 100 set Connection to LIN bus pinout physical diagram
Shipping list：
2x LIN 100, Fiber Optic Probe
1x LWL double 10 m, 10m dual channel fiber optic
1x LIN 100 acc
1x A5 case
1x LIN 100 m
Technical data of the LIN 100 set
<<<<提醒：左右滑动表格>>>>| Transmission range | 0-20 kbit/s |
| optical interface | 2 x Ø 2.2 mm |
| RS Radiation Immunity | > 200 V/m |
| Requires supply voltage (Master) | 8 - 15 V (Master) |
| Supply voltage required (Slave) | 8 - 30 V (Slave) |
| Current Input | max. 45 mA |
| Maximum fiber length | 20 m |
| Dimensions (L x W x H) | (37 x 12 x 8) mm |
EUTTEST also offers high and low speed CAN bus converter optical signaling products from Langer EMV, Germany, contact EUTTEST for details.
