Introduction：
The Magnetic Field Probe Model LF-U5 is a near-field probe manufactured by Langer EMV, Germany. The Magnetic Field Probe LF-U5 is specifically designed to detect magnetic fields on wide conductive paths, cables, connectors, electronic components, cables and their connectors. The probe functions like a coupling clip. The LF-U5 is a passive near-field probe. Measurements are made by placing the curved underside of the probe on the surface of the component. Field lines from other sources entering the probe directly or laterally are also detected.
The near-field probe is compact and convenient. It has a current attenuation sheath and is therefore electrically shielded. It can be connected to a spectrum analyzer or an oscilloscope with a 50 Ω input. The Magnetic Field Probe does not have a 50 Ω internal termination resistor.
Technical parameters：
<<<<提醒：左右滑动表格>>>>| Magnetic Field Probe Models | LF-U5 |
| portfolio | LF1 SET |
| manufacturer | Germany Langer EMV |
| Agents in China | EUT TEST |
| Frequency range | 100kHz-50MHz |
| resolution (of a photo) | ≈5mm |
| Probe Tip Size | 6*6mm |
| output connector | SMB |
Technical data sheet for the LF-U5 near-field probe:
Frequency Response Graph of LF-U 5 dBµV / dBµA/m
Magnetic field correction curve for LF-U 5
Current correction curve for LF-U 5
LF-U 5 Magnetic Field Probe Measurable Magnetic Field Direction and Schematic Diagrams
