Introduction：
The Magnetic Field Probe Model LF-R 50 is a near field probe manufactured by Langer emv, Germany. The LF-R 50 is a passive near field probe.
The magnetic field probe LF-R 50 is designed to measure components, equipment or cables up to 3 cm away. This allows larger components to be detected as possible sources of interference. Due to its diameter, sensitivity and resolution, the LF-R 50 operates between the ranges of the LF-R 400 and LF-R 3 near-field probes. The near-field probe is compact and convenient. It has a current attenuation sheath and is therefore electrically shielded. It can be connected to a spectrum analyzer or an oscilloscope with 50 Ω input. The magnetic field probe does not have a 50 Ω internal termination resistor.
Technical parameters：
<<<<提醒：左右滑动表格>>>>| Magnetic Field Probe Models | LF-R 50 |
| portfolio | LF1 SET |
| manufacturer | Germany langer emv |
| Agents in China | EUT TEST |
| Frequency range | 100kHz-50MHz |
| Probe Tip Size | Ø 10mm |
| output connector | SMB |
Frequency Response Curve of LF-R 50 dBµV / dBµA/m
Magnetic field correction curve for LF-R 50
Current correction curve for LF-R 50
LF-R 50 Magnetic Field Probe with Measurable Magnetic Field Direction and Schematic Diagram
