Introduction：
ICR Miniature Near-field Probe Serial is a set of miniature near-field probes for IC chip-side channel analysis produced by langer in Germany and sold by EUTTEST in Shenzhen, China. the coil at the top of the ICR probe is aligned horizontally with the horizontal plane, and the probe is built-in with a voltage stabilizer and uses theBT706Carry out the power supply.
langer BT706 Bias Power Supply
ICR probes are used to measure near-field magnetic or electric fields with a preamplifier integrated into the probe housing. Adjustment screws on the housing allow the probe tip to be manually aligned with the probe housing.The ICR probe supports the collision protection feature of the langer scanner, which stops movement during vertical movement if the device under test is touched. The probe housing can also be mounted on other testers.
Attention! Due to its construction, the tip is very sensitive to shocks, therefore we recommend positioning the probe by means of the langer automatic positioning system.
function：
- Surface scanning of IC chips according to IEC 61967-3
- Volumetric scanning of IC chips
- Pin Scanning
- Side channel analysis
Technical parameters：
<<<<提醒：左右滑动表格>>>>| Product name | ICR Miniature Near Field Probe Kit |
| Available frequency | 1.5MHz-6GHz |
| resolution (of a photo) | 60-300μm |
| Standard Options (without probe) | BT 706, Bias power supply for ICR probes SMA-SMA RA, SMA connection cable ICR-C, ICR Probe Calibration Certificate ICR Corr, Correction Curve NT FRI EU, Power Adapter ICR case1, box  Diagram of all accessories for ICR Miniature Near Field Probe Kit - without probe |
| ICR Kit Optional Probes and Parameters | table below |
The ICR Miniature Near Field Probe Kit can be freely configured with a variety of test probes, you can choose 1 or more probes plus the standard options in the table above to start testing. Please follow the table headers in the first row of the table below to make your selection, or contact us for information.
langer ICR Miniature Near-Field Probe Diagram
| ICR Probe Models | Probe Diameter | resolution (of a photo) | Test direction | Available frequency |
| ICR HV 100-27 | 100 µm | 60 µm | perpendicular | 1.5MHz - 6GHz |
| ICR HV 100-6 | 100 µm | 60 µm | perpendicular | 2.5MHz - 6GHz |
| ICR HH 100-27 | 100 µm | 70 µm | level (of achievement etc) | 1.5MHz - 6GHz |
| ICR HH 100-6 | 100 µm | 70 µm | level (of achievement etc) | 2.5MHz - 6GHz |
| ICR HV 150-27 | 150 µm | 80 µm | perpendicular | 1.5MHz - 6GHz |
| ICR HV 150-6 | 150 µm | 80 µm | perpendicular | 2.5MHz - 6GHz |
| ICR HH 150-27 | 150 µm | 100 µm | level (of achievement etc) | 1.5MHz - 6GHz |
| ICR HH 150-6 | 150 µm | 100 µm | level (of achievement etc) | 2.5MHz - 6GHz |
| ICR HV 250-75 | 250 µm | 150 µm | perpendicular | 500kHz - 2GHz |
| ICR HV 250-6 | 250 µm | 150 µm | perpendicular | 2.5MHz - 6GHz |
| ICR HH 250-75 | 250 µm | 110 µm | level (of achievement etc) | 500kHz - 2GHz |
| ICR HH 250-6 | 250 µm | 110 µm | level (of achievement etc) | 2.5MHz - 6GHz |
| ICR HV 500-75 | 500 µm | 300 µm | perpendicular | 200kHz - 1GHz |
| ICR HV 500-6 | 500 µm | 300 µm | perpendicular | 2MHz - 6GHz |
| ICR E 150 | 150 µm x 35 µm | 65 µm | level (of achievement etc) | 7MHz - 3GHz |
Langer has created a number of fixed configurations for the above probes and standard options, so refer to the probe parameters above to select the kit you need. See below for a list of ICR probe kit models:
- ICR HV 100-27 set
- ICR HV 100-6 set
- ICR HH 100-27 set
- ICR HH 100-6 set
- ICR HV 150-27 set
- ICR HV 150-6 set
- ICR HH 150-27 set
- ICR HH 150-6 set
- ICR HV 250-75 set
- ICR HV 250-6 set
- ICR HH 250-75 set
- ICR HH 250-6 set
- ICR HV 500-75 set
- ICR HV 500-6 set
- ICR E 150 set
- ICR 03 set
- RF3 mini set
