Introduction：
INS-0805 is the INS Sequential Pulse Insulation Test Generator manufactured by EMCpartner, Switzerland and distributed by EUTTEST.Optional circuit modules for customizable outputsVoltage pulse 1.2/50 μs, 0.5 J, 500 Ω, 8 kV for testing the insulation of samples against voltage pulses.
Technical parameters：
<<<<提醒：左右滑动表格>>>>| Equipment Model | INS-0805 |
| manufacturer | EMCpartner |
| agent | EUTTEST |
| Meet the standard | iec 61180, iec 60255-27, iec 62052-11. iec 60834-1/2, en 50470-1 |
| Voltage test level 0.5 J | 0.5 kV, 1 kV, 1.5 kV, 2 kV, 2.5 kV, 3 kV, 4 kV. 5 kV, 6 kV, 8 kV + 0 % / - 10 % |
| Pulse capacitance | 250nF ±20% |
| polarities | Positive, negative, alternating |
| Output impedance | 500Ω±10% |
| Pulse Rise Time | 1.2μs ±30% |
| Pulse duration | 50μs ±20% |
| pulse energy (physics) | 0.5 J ±10% |
| repetition rate | 1s - 655s |
| INS-0805 Control Attributes | |
| operating system | EMCPARTNER FIRMWARE |
| multilingualism | 10 types available |
| user interface | 7-inch touch screen |
| communications port | Network Port, USB, RS485 |
| BNC port to monitor surge voltage | 1V=4KV, accuracy 3% |
| Pulse voltage display | 0.5kV- 8kV, Accuracy 3% |
| peak detection function | usability |
| trigger output | BNC, MAX 12V |
| Trigger Input | Automatic, Manual, External BNC |
| pulse counter | Programmable 65535 |
| emergency stop | Emergency stop button, BNC input (EUT disabled) |
| weight | 1.5kg |
| size | 24*10*8.5cm |
| INS0805 to be used with generator | INS-1250-7K5 INS-1250-15K INS-1250-22K5 INS-1250-30K |
Contact EUTTEST for detailed parameters of the above options.
INS-0805 Match requiredINS Sequential Insulation Pulse GeneratorUse:
The INS is a serial model that includes the INS-1250-7K5, INS-1250-15K, INS-1250-22K5, and INS-1250-30K;
Generator:
INS-1250-7K5 The following is an example of a customized output for a 7.5 kV impulse 1.2/50 μs, 40 Ω and/or custom output.
INS-1250-15K The following is an example of the type of power supply that can be used with a 15 kV impulse 1.2/50 μs, 40 Ω and/or custom output.
INS-1250-22K5 The following is an example of a customized output for a 22.5 kV impulse 1.2/50 μs, 40 Ω and/or custom output.
INS-1250-30K The following is an example of the type of power supply that can be used with a 30 kV impulse 1.2/50 μs, 40 Ω and/or custom output.
circuit module
INS-0805, 500 ohm output/ 0.5 J with 0.5 kV, 1 kV, 1.5 kV, 2 kV, 2.5 kV, 3 kV,4 kV, 5 kV, 6 kV and 8 kV test levels (this page)
Matching Networks:
CN-INS-500: 500 Ω, or 40 Ω direct output from the generator.
CN-INS-X: 40Ω-4kΩ customizable
Other optional modules:
OPT-INS-MEAS: Voltage and Current Test Boards
V-PROBE-30K: Voltage Probe
EXT-INS-CON: test chamber
TC-ST: Safety circuits
TC-ADAPTER: Conversion Circuitry
WARNING-LAMP: Hazard warning lamps
EMERGENCY-STOP: Emergency stop button
TEMA3000: Test Software
INS serial products have replacedMIG Serial ProductsMultiple models, contact us for more information.
Reference: Digital Isolators - High Voltage Enhanced Isolation: Safety Regulations, Standard Definitions and Test Methods
