Product Description:
ICI-DP HH150-15 set is a double-pulse fault injection set manufactured by Langer EMV-Technik, Germany, and authorized by EUTTEST Shenzhen for sales and quotation service. The set provides a 150μm resolution injection probe and a burst generator, which allows users to directly use the set to complete fault injection tests up to 1000V.
Technical parameters：
<<<<提醒：左右滑动表格>>>>| Product model | ICI-DP HH150-15 set |
| manufacturer | Langer |
| agent | Euttest |
| Probe Size | Probe tip diameter 150μm |
| Pulse Rise Time | 2ns |
| polarities | Bipolar +/- Switched by software |
| output voltage | 50-1000V |
| Minimum trigger pulse delay | 35ns |
| Standard Accessories | Note: 1x represents one. 1x ICI-DP HH150-15 Dual Pulse Probe 1x BPS 204 Sudden Power Station 1x BPS 204-Client Official Test Software 1x HV FI-FI mini 1 m, high voltage cable 1x SK FI-FI 7P 1 m 1x SMA-SSMB 1 m 1x NT FRI EU 24V 1x USB-AB 1x ICI-DP case 1x ICI-DP m 1x BPS 204 m 1x ICI-DP qg |
Recommended Configuration:
The ICI-DP HH150-15 probe in the kit needs to be fixed in position for double pulse fault injection testing, so we recommend using the ICS105 with this kit, as shown in the figure below, the ICS 105 will clamp the ICI-DP HH150-15 probe above the DUT chip and move it left, right, up and down. The ICS 105 can also be controlled by the BPS 204 Client test software to form a fast and stable automated fault injection test system.
ICI-DP HH150-15 set kit with ICS105 scanner for double-pulse fault injection testing
