Introduction：
The ICI-DP HH1000-15 is a dual pulse fault injection magnetic field probe for integrated circuits, manufactured by Langer in Germany and distributed and serviced by EUTTEST. ICI-DP HH1000-15 Probe Tip Diameter 1000μm, Dual Pulse Magnetic Field Source The ICI-DP HH1000-15 injects fast transient magnetic field pulses into DUTs (e.g., IC integrated circuits), and is designed for EM Failure Injection (EMFI) in IC safety applications. Using this probe, single pulses as well as double pulse sequences with a minimum pulse following time of 25 ns can be injected into ICs with precise timing and position.
With the "Sync" input, single or double pulses can be injected into the DUT's function sequence in a synchronized manner. The probe is powered and controlled by the pulse generator BPS 204.
Technical parameters：
| Probe Model | ICI-DP HH1000-15 |
| use | IC fault injection of magnetic field pulses |
| manufacturer | Langer emv |
| agent | Euttest |
| Probe tip diameter | 1000μm |
| Maximum pulse injection voltage | 1000V |
| rising time | 2ns |
| Maximum current | 16A |
| pulse width | 10ns |
| Minimum Pulse Sequence Time | 25ns |
| repetition rate | 0.1 Hz - 15 kHz (single pulse, <500 V) 0.1 Hz - 7.5 kHz (double pulse, <500 V) |
| polarities | bipolar |
| Minimum trigger pulse delay | 35ns |
| Accessory Trigger Pulse Delay | Controlled by BPS 204 pulse generator |
| Probe power supply | Powered by BPS 204 |
| mass (in physics) | 190g |
| size | 26 mm x 54 mm x 71 mm |
We offer more optional probe tip diameters:
ICI-DP HH250-15 Probe Tip Diameter: 250μm
ICI-DP HH500-15 Probe Tip Diameter: 500μm
ICI-DP HH1000-15, Probe tip diameter: 1000μm (Products on this page)