Introduction：
The FMZB 1519 C is an active magnetic field receiving loop antenna developed and manufactured by Schwarzbeck, Germany. The 50cm diameter antenna is manufactured in accordance with CISPR 16-1-4 and ANSI C 63.10 standards, and is available in the frequency range of 9 kHz to 30 MHz. When the input signal is close to or exceeds the 1dB compression point of the loop antenna, the overload indicator on the front of the antenna will be activated and the test engineer can remotely view the status of the indicator and make a decision to terminate the test. When the input signal approaches or exceeds the 1 dB compression point, an overload indicator on the front of the antenna is activated, allowing the test engineer to remotely view the status of the indicator and make a decision on test termination.
Test application:
This loop antenna can be connected to a CISPR16-compliant EMI receiver to form a low-noise field strength measurement system capable of measuring pulsed signals. The loop antenna is constructed with a rugged aluminum alloy housing and has a 1/4 thread mounted on the bottom, allowing the antenna to be mounted on an antenna tripod. AM9144 or on a hand-held handle option.
Can be mounted on the handle for testing
This loop antenna is manufactured by Schwarzbeck - Mess-Elektronik and represented by EUTTEST Shenzhen for sales and after-sales service, so we also offer options such as adapters for customizing this antenna for mounting on a tripod.
Configured with 10 alkaline nickel-metal hydride (NiMH-Mignon) rechargeable batteries, this ring antenna FMZB1519C can be used for frequency-selective measurements of magnetic fields (virtual electric fields) in the longwave, mediumwave, and shortwave frequency ranges, and for testing in accordance with CISPR (e.g., CISPR 16-1-4), MIL, FCC, EN, ISO, ANSI, ETSI, and many other standards. many other standards.
Note on selection and matching:
This ring antenna replaces the discontinued FMZB 1513 B The
When testing the CISPR32 standard, the antenna diameter of 50cm can not meet the standard test requirements, you need to configure a special 60cm antenna diameter, please purchase:
Technical parameters：
| Antenna Model | FMZB 1519 C |
| producers | Schwarzbeck |
| agent | Shenzhen EUTTEST |
| Test Frequency | 9kHz-30MHz |
| Antenna factor - electric field | 20 dB/m |
| Antenna factor - magnetic field | -31.5 dB/Ωm |
| Antenna Ring Diameter | 50cm |
| Field strength measurement range - 9kHz IF bandwidth | 31-140 dBμV/m (1 MHz) |
| Field Strength Measurement Range -200Hz IF Bandwidth | 11-140 dBμV/m (1 MHz) |
| frequency response | ±1dB |
| standing wave ratio (physics) | <2 |
| working hours | >12 hours. |
| Supply Battery | 12V NiMH 1.9 Ah |
| Antenna bracket adapter thread | 3/8 inch, 1/4 inch |
| Antenna Mount Adapter | Customized by EUTTEST |
| Hand Held Handle Mounting Threads | 3/8 in. |
| Handle Adapter | Customized by EUTTEST |
| size | 530mm*590mm*110mm |
| weight | 1.9kg |
Graph of related technical parameters：
Antenna Coefficient Graph
