FESP 5410-1 Schwarzbeck magnetic field coil

Introduction：

FESP 5410-1 is the latest magnetic field coil produced by Schwarzbeck, Germany, in 2021. It is authorized to be sold and provide after-sales service by Shenzhen EUTTEST. It is made of aluminum material and the antenna cross-section is 10mm*25mm. The magnetic field coil can build the magnetic field immunity environment required by the following standards.：

• IEC 61000-4-8 power frequency magnetic field immunity test system(Including national standard: GBT 17626.8), cooperate with MFPO 9760；
• IEC 61000-4-9 pulsed magnetic field immunity test system (including national standard: GBT 17626.9)；
• IEC 61000-4-10 Damping shock wave immunity test system (including national standard: GBT 17626.10)；

The difference between FESP5410-1 and FESP5210-1 is that FESP5410-1 can pass through 1200A of instantaneous current, while FESP5210-1 can only pass through 200A of current.

Other uses：

You can combine two identical FESP5410-1 into a square induction coil parallel to each other to form a Helmholtz coil (Helmholtz coil is defined by IEC 61000-4-9 standard). The main advantages of Helmholtz coil pairs are the enhancement of field force and the significant improvement of field uniformity. The coil planes are aligned in parallel, and the electrical coils must be connected in series. According to the principle of the right-hand rule of the energized wire, it is necessary to ensure that the current through the coil must flow in the same direction. Direction.

Can be combined into Helmholtz coils

Technical parameters：

The strength of the magnetic field in the center of the antenna loop after 1A current is introduced