Introduction：
FESP 5210-1 is a magnetic field coil produced by Schwarzbeck in Germany and sold by EUTTEST. It supports a maximum input continuous current of 100A. You can use it to test the requirements of the standards IEC 61000-4-8, IEC 61000-4-9, and IEC61000-4-10 to generate the required power frequency magnetic field, pulsed magnetic field, and damped oscillating wave magnetic field resistance.For interference test, you can also use this coil with magnetic field generators of brands such as EMTEST, TESEQ, and EMCPARTNER. The side length of this square coil is 1 m, and the coil is equipped with terminal blocks, allowing EMC testers to make multi-functional and simple connections to other current sources.
Our company recommends the use of magnetic field induction coil FESP5210-1 and MFPO 9760 compositionPower frequency magnetic field immunity test system, Because they are all produced by Schwarzbeck, the compatibility is higher.
Other uses：
You can combine two identical FESP 5210-1 into a square induction coil parallel to each other to form a Helmholtz coil (Helmholtz coil is defined by IEC 61000-4-9 standard). The main advantages of Helmholtz coils are the enhancement of field force and the significant improvement of field uniformity. The coil planes are aligned in parallel, and the electrical coils must be connected in series. According to the principle of the right-hand rule of the energized wire, it is necessary to ensure that the current through the coil must flow in the same direction. Direction.
Can be combined into Helmholtz coils
Technical parameters：
<<<<提醒：左右滑动表格>>>>| Model number | FESP 5210-1 |
| manufacturer | Schwarzbeck |
| agent | Euttest |
| Available frequency range | DC-10 MHz |
| Side length | 1m ± 1% |
| Number of turns | 1 |
| Maximum continuous current | 100 A |
| Maximum current (10 min): | 150 A |
| Maximum current (1 min): | 200 A |
| Maximum continuous field strength (ring center): | 90 A/m |
| Sensory resistance | 3.4 µH |
| Self-resonance | 16 MHz |
| Material/diameter | Aluminum/12 mm |
| Support rod | 22 x 195 mm |
| With bracket | AM9144 |
| Training service provider | EUTTEST |
| weight | 1.5 kg |
| connector | 4 mm banana head |
| Meet the standard
| IEC 61000-4-8, GBT 17626.8 IEC 61000-4-9, GBT 17626.9 IEC 61000-4-10, GBT 17626.10 |
The field strength generated by the 1A current on the coil
