Introduction：
FCC-801-T4-RJ45 is a U.S. FCC company produces a 4-pin network port for the DUT for the conductive common-mode immunity test, the coupling and decoupling network can only be used for unshielded network port test, and only four by the D-sub25 to the network port of the pins available, the coupling and decoupling network to support the maximum of 400mA of the current input, this product by the Shenzhen Yi This product is represented by Shenzhen Eutec Company in the national sales and quotation service.
Technical parameters：
<<<<提醒：左右滑动表格>>>>| Product model | FCC-801-T4-RJ45 |
| manufacturer | United States FCC |
| agent | Shenzhen EUTTEST |
| Test Frequency | 150kHz-230MHz |
| Number of signal lines | 4 articles |
| Common mode impedance | 150kHz-26MHz Frequency: 150Ω ±20Ω At 26MHz-80MHz: 150Ω +60Ω / -45Ω At 80MHz-230MHz frequency: 150Ω ±60Ω |
| Meets standard requirements | IEC 61000-4-6, Clause 6.2, Form 3 Requirements IEC 61000-4-6, Appendix B, Form B.1 requirements |
| Maximum current | 400mA |
| Maximum voltage | AC: 100V RMS DC: 100V |
| connector | Dsub-25 female connector (pins 6, 7, 19, 20) to RJ45 network port |
| RF Port Impedance | 50Ω |
| Maximum Conducted Injection Voltage | 30V Full Frequency Range |
Recommendations for similar products:
The following CDNs are also configured with network ports, click on the product link for more information:
