Introduction：
The F-75B is a 500MHz current probe manufactured by FCC (USA) and distributed by EUTTEST (Shenzhen). The probe can hold up to 70mm diameter cable, making it ideal for large cable bundles such as those used in new energy vehicles. The probe can pass 100A pulsed current with a pulse rise time of 800 picoseconds and a pulse width of 40 nanoseconds, and can also pass 250A of operating current in the DC-400Hz range.
Technical parameters：
<<<<提醒：左右滑动表格>>>>| Current Probe Models | F-72-7 |
| producers | United States FCC |
| agent | Shenzhen Euttest |
| Available frequency range | 1k Hz - 500 MHz |
| Internal Ring Diameter | 70 mm |
| External ring diameter | 125 mm |
| high degree | 38 mm |
| Typical ZtΩ | 1Ω |
| Typical dBΩ | 0Ω |
| connector | N, 50 ohms |
| Rated power current value | 250 A (DC - 400 Hz) |
| RF (CW continuous wave) | 10A |
| peak pulse current (physics) | 100A 1: Calibrate the probe with a 50Ω+j0Ω load impedance. 2: Depends on pulse width and pulse repetition rate. |
| Optional calibration fixture | fcc-mpcf-2/70/125/38 |
Graph of related technical parameters：
Transmission impedance graph
