Introduction：
The F-42 is a 100 MHz current probe manufactured by FCC Fischer Custom Communications, Inc. and authorized for sale by EUTTEST in Shenzhen, China, that can be used for laboratory and field test measurements of RFI emissions. This probe has a test frequency range from 1 kHz to 100 MHz and can be operated at 350 amps DC without saturating or altering the transmitted impedance of this probe.
Technical parameters：
<<<<提醒：左右滑动表格>>>>| Model number | F-42 |
| Product name | 100MHz Current Probe |
| manufacturer | U.S. FCC |
| agent | Shenzhen EUTTEST |
| Available frequency range | 1 kHz-100 MHz |
| Internal Ring Diameter | 32 mm |
| External ring diameter | 98 mm |
| high degree | 38 mm |
| Typical ZtΩ | 5.6Ω |
| Typical dBΩ | 15Ω |
| connector | N, 50Ω |
| industrial frequency current | 350 A (DC - 400 Hz) |
| Continuous wave current | 3A |
| peak pulse current (physics) | 100A 1: Calibrate the probe with a 50Ω+j0Ω load impedance. 2: Depends on pulse width and pulse repetition rate. |
| Optional calibration fixture | fcc-mpcf-3-32/71/19 |
| packing list | One probe; One copy of the instruction manual; One copy of factory calibration data; One hard plastic case; |
Graph of related technical parameters：
Transmission impedance graph
Product specifications are subject to change without notice.
