Introduction：
F-38-1 is produced by the U.S. FCC (Fischer Custom Communications, Inc.) and authorized by the Shenzhen EUTTEST agent sales of 200MHz current probe, the current probe using clamp structure design, making it easy to clamp and disconnect the wire, the probe has a 5mm ring hole can be clamped inside the test cable to test directly. The probe has a 5mm ring hole inside the probe to hold the test cable for direct testing without destroying the operating condition of the cable under test, providing a wide range of bandwidth measurement capabilities for both laboratory and bench environments.
Technical parameters：
<<<<提醒：左右滑动表格>>>>| Model number | F-38-1 |
| Product name | 200MHz Current Probe |
| manufacturer | U.S. FCC |
| agent | Shenzhen EUTTEST |
| Available frequency range | 1kHz-200MHz |
| Internal Ring Diameter | 5 mm |
| External ring diameter | 54 mm |
| high degree | 10 mm |
| Typical ZtΩ | 2.8Ω |
| Typical dBΩ | 9Ω |
| connector | SMA, 50Ω |
| industrial frequency current | 20 A (DC - 400 Hz) |
| Continuous wave current | 1A |
| peak pulse current (physics) | 10A 1: Calibrate the probe with a 50Ω+j0Ω load impedance. 2: Depends on pulse width and pulse repetition rate. |
| Optional calibration fixture | FCC-MPCF-F-38 |
| packing list | One probe; One copy of the instruction manual; One copy of factory calibration data; One hard plastic case; |
Graph of related technical parameters：
Transmission impedance graph.
F-38 Sequence Probe:
The F-38 series also has several probe models, you can choose any one of the current probes to meet your testing needs, click on the model number to see more technical data information.
- F-38-2 Current Probe , 1kHz-200MHz, transmission impedance 1Ω
- F-38-4 Current Probe , 1MHz-1GHz, transmission impedance 5.6Ω
