Introduction:
F-33-2 is a 250MHz monitoring current probe manufactured by FCC (Fischer Custom Communications, Inc.) and authorized to be sold by Shenzhen EUTTEST, which can be used in EMC labs and large EUT samples for on-site testing, and is available in the frequency range of 1 kHz to 250MHz. Typical calibration curves are shown in the calibration pictures. The probe has a small outer diameter of about 71 mm and an inner diameter of 32 mm.
Technical parameters:
<<<<提醒:左右滑动表格>>>>Model number | F-33-2 |
Product name | 250MHz Monitoring Current Probe |
manufacturer | U.S. FCC |
agent | Shenzhen EUTTEST |
Available frequency range | 1kHz-250MHz |
Internal Ring Diameter | 32 mm |
External ring diameter | 71 mm |
high degree | 19 mm |
Typical ZtΩ | 1 |
Typical dBΩ | 0 |
connector | N Female, 50 Ohm |
industrial frequency current | 100 A (DC - 400 Hz) |
Continuous wave current | 2A |
peak pulse current (physics) | 50A 1: Calibrate the probe with a 50Ω+j0Ω load impedance. 2: Depends on pulse width and pulse repetition rate. |
Optional calibration fixture | fcc-mpcf-3-32/71/19 |
packing list | One probe; One copy of the instruction manual; One copy of factory calibration data; One hard plastic case; |
Transmission impedance graph.

Transmission impedance graph.
FCC: Product specifications are subject to change without notice.