Introduction：
The F-33-1 is manufactured by FCC in the U.S.A. and licensed to EUTTEST for sale in China. It is used for laboratory and field testing and has a small outside diameter of approximately 71 mm and an inside diameter of 32 mm. The probe has a typical transmission impedance of 15 dB (±2 dB) over the frequency range of 70 kHz to 250 MHz, an RF current range of 10 amps continuous and 100 amps peak, a duty cycle of 0 1, and a maximum current of 100 amps (from DC to 400 Hz) on the primary power line. The RF current ranges from 10 Amps continuous wave and 100 Amps peak, with a duty cycle of 0.1, and a maximum current of 100 Amps (from DC to 400 Hz) on the primary power line.
Technical parameters：
<<<<提醒：左右滑动表格>>>>| Model number | F-33-1 |
| Product name | 500kHz current probe |
| manufacturer | U.S. FCC |
| agent | Shenzhen EUTTEST |
| Available frequency range | 10kHz-250MHz |
| Internal Ring Diameter | 32 mm |
| External ring diameter | 71 mm |
| high degree | 19 mm |
| Typical ZtΩ | 6.3 |
| Typical dBΩ | 16 |
| connector | N Female, 50 Ohm |
| industrial frequency current | 100 A (DC - 400 Hz) |
| Continuous wave current | 2A |
| peak pulse current (physics) | 50A 1: Calibrate the probe with a 50Ω+j0Ω load impedance. 2: Depends on pulse width and pulse repetition rate. |
| Optional calibration fixture | fcc-mpcf-3-32/71/19 |
| packing list | One probe; One copy of the instruction manual; One copy of factory calibration data; One hard plastic case; |
Transmission impedance graph
FCC: Product specifications are subject to change without notice.
