Introduction：
F-220124-1005-1 is a monitoring current probe and current clamp manufactured by FCC - Fischer Custom Communications, Inc. and authorized by EUTTEST Shenzhen for sale in China. The current probe can test up to 1GHz, and every EMC engineer can use this probe to test samples in the lab and in the field.
Test Criteria:
F-220124-1005-1 fully complies with the certification testing requirements of the following standards:
● Military Standard Mil-Std 461F CS114, GJB 151B-2013 CS114.
:: Military Standard Mil-Std. 461F CS115, GJB 151B-2013 CS115
● Military Standard Mil-Std. 461F CS116, GJB 151B-2013 CS116.
:: DO-160 Section 20
Technical parameters：
| Monitoring Probe Model | F-220124-1005-1 |
| manufacturer | FCC |
| Domestic Authorized Agents | Shenzhen EUTTEST |
| frequency | 10kHz-1GHz |
| Inner ring diameter | 32mm |
| Outer ring diameter | 71mm |
| high degree | 19mm |
| ZtΩ | 0.35 |
| dBΩ | -9 |
| connector | N |
| DC-400Hz | 50A |
| RF cw | 2A |
| Pulse | 100A |
| Calibration Fixture | fcc-mpcf-3-32-40/71/19 |
F-220124-1005-1 is supplied from the factory by the FCC with a calibration and test report, typical calibration curves are shown below:
Transmission impedance of F-220124-1005-1
