Introduction：
F-200921-1005-1 is a 750 MHz current monitoring probe authorized by the U.S. FCC - Fischer Custom Communications Inc and distributed by EUTTEST in Shenzhen, China. The probe can be opened by the side of the snap and clamped on the cable under test, the EUT will be extended power line or signal line to the outward propagation of common-mode current nuisance signals, at this time you can use this probe in the frequency range of 1 kHz - 750 MHz to test the conductive interference signal component.
Technical parameters：
<<<<提醒：左右滑动表格>>>>| Monitoring Probe Model | F-200921-1005-1 |
| manufacturer | United States FCC |
| Domestic Authorized Agents | Shenzhen EUTTEST |
| frequency | 1kHz-750MHz |
| Inner ring diameter | 40mm |
| Outer ring diameter | 98mm |
| high degree | 38mm |
| Transmission impedance ZtΩ | 1.77 Ω |
| Transmission Impedance dBΩ | 5 dBΩ |
| connector | N |
| DC-400Hz Passable current | 500A |
| RF Continuous Wave Passable Current | 3A |
| Pulse Signal Current | 100A |
| Calibration Fixture | fcc-mpcf-2-32-40/98/38 |
Transmission impedance graph:
Transmission impedance graph
We also offer the following FCC 200921 Sequence Probes, please select the appropriate test instrument based on the following key parameter differences:
- F-200921-1005-2 ; 10kHz-400MHz ; ZtΩ=1Ω ; Maximum operating current: 500A;
