Introduction：
The F-140-HV High Power Injection Probe manufactured by the FCC can be used in the 400 MHz range and is commonly used for ISO 11452-4 BCI testing, GB151B, CS114 testing for MIL STD 461 C D E F G, and DO160 section20 testing, per DO-160 section 20, you will be able to use this injection probe to perform BCI conducted RF susceptibility testing. probe to perform BCI conducted RF sensitivity testing. This probe also complies with DO160-S22 section 22 for Pulse Induced Damped Sinusoidal Test for 5kV Pulse Injection - Flash Induced Transient Magnetization.
This probe is sold and quoted service by Shenzhen EYT Company as agent.
Technical parameters：
<<<<提醒：左右滑动表格>>>>| Injection Current Probe Model | F-140-HV |
| manufacturer | United States FCC |
| agent | Shenzhen EUTTEST |
| Injection frequency range | 100 kHz - 400MHz |
| Inner ring diameter | 40 mm |
| Outer ring diameter | 127 mm |
| Probe Height | 70 mm |
| Maximum injected power | 100W |
| Optional accessories | FCC-BCICF-1-HV Current Probe Calibration Fixture |
Insertion loss graph:
Insertion Loss Graph
FCC Manufacturer's Statement: Product specifications are subject to change without notice.
