ETS 3159C Biconical Antenna Introduction:
The ETS 3159C Biconical Antenna is a broadband, linearly polarized biconical antenna manufactured by ETS-Lindgren in the U.S.A. and authorized for sale by EUTTEST. 3159 Biconical Antennas have a wide beamwidth and are specifically designed to handle up to 10 kW of input power to produce high electric field strengths over large, uniform areas. generate high electric field strengths over large uniform areas.
Unlike high-capacity capacitively loaded log-periodic dipole antennas typically used in this frequency range, the phase center/source distance is the same for both low and high frequencies. This ensures high field strengths at frequencies as low as 30 MHz.The Type 3159 design takes advantage of the wide beamwidth capabilities of the biconical antenna, which is optimized to provide low VSWR and high radiation efficiency.
An optional pulley base is available for horizontal and vertical antenna polarization, height and tilt angle adjustment. Cylinders are used to change polarization and can be remotely controlled using the optional controller.
Technical data of the ETS 3159C:
<<<<提醒:左右滑动表格>>>>Product model | ETS 3159C |
producers | ETS-lindgren |
agent | EUTTEST |
Available frequency range | 30MHz-100MHz |
connector | 1 5/8 EIA flange |
impedance | 50Ω |
standing wave ratio (physics) | Typical value 2:1 |
polarize | biometrics |
antennae direction | in all directions |
ETS 3159C Maximum Input Power | 15kW |
size | Custom base size height (high range): 2 m (6.56 ft) Custom base size height (low range) 1.6 m (5.25 ft) Custom base size length 120 cm (47.24 in) Customized base size width 120 cm (47.24 inches) Length 300 cm (118.11 inches) |
Random Accessory | High Power Baron (15 kW) Option: Custom Positioner Positioning Controller |
ETS 3159C Antenna Coefficients, Gain, Input Power vs. Field Strength graphs from ETS-LINDGREN can be obtained by contacting EUTTEST.