ES613 Electrostatic Discharge Gun Introduction
The ES613 is the latest ESD gun designed and manufactured by ESDEMC in the USA and offered by EUTTEST Shenzhen for sales and training. The ES613 consists of two different products, the ES613-20 and the ES613-30. The ES613 has state-of-the-art features including replaceable RC network modules, replaceable rise time discharge heads, discharge counting, and remote control. This product is compliant with IEC 61000-4-2 and ISO 10605 standards. Positive and negative testing and discharge voltage levels up to 20 kV or 30 kV are available.
- System-level and board-level ESD sensitivity testing
- Used as a high voltage DC source
- High voltage charging and spark discharge testing
- High Voltage Breakdown Test
Product benefits of the ES613:
The most ergonomically designed electrostatic discharge gun available
Ultra-light static gun (< 700 g, lightest on the market)
Integrated charge auto-discharge circuit
Extra large touch screen (5 inches)
Best voltage control stability (single pulse error < 1%, 20 Hz pulse error < 5%)
Exclusive high-precision high-voltage test mode (for high-voltage charging or breakdown testing)
Intelligent Device Under Test (DUT) Failure Level Scan Mode (automatically switches polarity and increases pulse voltage level according to user settings)
Remotely controllable
Pulse Injection Modes: Trigger, 1Hz, 2Hz, 5Hz, 10Hz, and 20Hz
Interchangeable RC modules to meet different standards (user customizable)
Technical data of ES613:
| The ES613 consists of two models | ES613-20 | ES613-30 |
| control model | ES613-C20 | ES613-C30 |
| ESD gun model | ES613-G20 | ES613-G30 |
| Test Voltage Range | 0.1 kV to 20 kV | 0.1 kV to 30 kV |
| Test Voltage Step | 0.1 kV/step | |
| voltage error | Calibrated to ±1% (FS) | |
| voltage polarity | Positive Polarity, Negative Polarity | |
| discharging interval | Trigger, 1 Hz, 2 Hz, 5 Hz, 10 Hz, 20 Hz | |
| discharging charge | To 65535 | |
| Discharge mode | Contact Discharge, Air Discharge | |
| operation panel | Large 5-inch touch screen | |
| Trigger Mode | Gun Trigger / Remote Control | |
| operating mode | hand control automatic mode High voltage power supply mode Remote control (optional) | |
| hand control | Allows IEC standard presetting before each discharge | |
| automatic mode | Setting the start and end voltage, voltage step, number of pulse injections for each voltage level, and discharge polarity for the test, and performing the scanning automatic test of the DUT failure level. User-defined settings | |
| High voltage power supply mode | Used as a high precision high voltage power supply with a maximum output current of 1 mA. | |
| power (output) | 100 to 240 V AC 50/60 Hz +/-10% 60 W | |
| size | 35 X 28 X 15 cm | |
| weight | 8 kg | 8.5 kg |
| warranty | 2 years | |
The ES613 comes standard with the following accessories.
| Model number | clarification |
| ES612-C20 (or ES613-C30) | 20 (or 30) kV Static and High Voltage Test Controller |
| ES613-G30 (or ES613-G30) | 20 (or 30) kV electrostatic discharge gun |
| ES613-CT | Contact Discharge Tip |
| ES613-AT | Air Discharge Tip |
| ES613-RC1 | 150 pF / 330 Ohm RC Module |
Options for ES613.
<<<<提醒：左右滑动表格>>>>| Accessory Number | descriptive | norm |
| ES613-RC1 | Replaceable RC Module 150 pF / 330 Ohm +/-10% | IEC 61000-4-2. ISO 10605 |
| ES613-RC2 | Replaceable RC Module 150 pF / 2000 Ohm +/-10% | ISO 10605 |
| ES613-RC3 | Replaceable RC Module 330 pF / 330 Ohm +/-10% | ISO 10605 |
| ES613-RC4 | Replaceable RC Module 330 pF / 2k Ohm +/-10% | ISO 10605 |
| ES613-RC5 | Replaceable RC Module 100 pF / 1500 Ohm +/-10% | JS-001-2014 HBM Mode. MIL STD 883E |
| ES613-RCX | User customizable replaceable RC modules | |
| ES613-FRT | Fast Rising Edge Discharge Head | Rise time < 400 ps |
| ES613-SAT | Spring-loaded air discharge head | |
| ES613-SCT | Spring-loaded contact discharge head | |
| ES614-CP | ESD Simulator Current Probe (with electric field shielding, bandwidth 10 kHz - 200 MHz) | |
| ES614-AS500 | Air Discharge Velocity Control Slide System (Control of electrostatic discharge gun approach speed: 5 - 500 mm/s) | |
| ES614-ASWS500 | Air Discharge Velocity Control Table (Control of electrostatic discharge gun approach speed: 5 - 500 mm/s, discharge angle: 0 - 90°) | |
| A4001 | ESD Current Target Calibrator | Calibrated ESD simulator current waveforms up to 30 kV, bandwidth up to 4 GHz, compliant with latest IEC and ISO standards |
| A4001-TP | ESD Current Target Plate | A shielding plate for assembling the ESD current target and shielding the measurement oscilloscope from ESD noise and direct coupling. |
| A4001-TSC | ESD Current Target Shielding Cabinet (Faraday Cage) | A shielding cabinet for assembling ESD current targets and shielding ESD noise from direct coupling for measurement oscilloscopes |
| A4002 | ESD Current Target Adaptor Cable | Adaptor cable connection current target, frequency response up to 4 GHz, in accordance with the latest IEC and ISO standards. |
| A4003 | ESD Current Target and Adapter Cable Calibration Set | Calibrated ESD simulators, ESD current targets and adapter cables up to 30 kV, bandwidth up to 4 GHz, compliant with latest IEC and ISO standards |
| ES615-A1 | ESD Test Bench | |
| ES615-A2 | Vertical coupling plate | |
| ES615-A3 | Horizontal coupling plate | |
| ES615-A4 | ESD Test Bench Insulation Pad | |
| ES615-A5 | grounding cable | |
| ES615-A6 | ESD GRP - Reference Ground Plate |
