Introduction:
ES612A is the U.S. ESDEMC company produced by the Shenzhen EUTTEST company agent sales of electrostatic generator, the electrostatic generator can complete the device level of ESD-HBM, ESD-HMM, ESD-MM test program. The DC characterization port on the generator can be used with DC test equipment such as digital source meters to help determine the electrostatic damage threshold more easily. The ES612A can be extended with a multi-pin automation generator and can also be used as a step in the device QC specification process.
The ES612A Electrostatic Generator's pulse source design and injection method ensures waveform performance at the device under test. The device's built-in current probe automatically captures the waveform during pulse injection, which is used to determine the conduction level of the protection circuit. In addition, voltage waveforms can be captured by connecting an optional voltage probe to an oscilloscope. Since the device can also be extended to detect DC characteristics before and after ESD waveform injection, damage determination of ESD events is possible.
Meets test criteria:
- General purpose ESD testing for wafers, packages, PCBs and system level devices
- HBM Modules Conform to ANSI / ESDA / JEDEC JS-001-2017, MIL-STD-883 and MIL-STD-750
- HMM Module Conforms to ANSI / ESD SP5.6-2019
- MM Module Conforms to ANSI / ESD STM5.2-2019
Optional Pulse IV and DC IV characterization capabilities

Discharge waveform of ES612A

Test System Configuration Diagram for ES612A
Technical data of ES612A:
ESDEMC's ES612A replaces the ES612 model, and the ES612A is available in a variety of output voltages and modules for different test applications:
ESD External Human Body Model (HBM) Waveform Generation Module
Designed in accordance with the requirements of the ANSI/ESDA/JEDEC JS-001-2017 standard
<<<<提醒:左右滑动表格>>>>parameters | HBM-2K | HBM-4K | HBM-6K | HBM-8K | HBM -12K | HBM -20K | unit (of measure) |
output voltage | ± 10 ~ 2000 | ± 10 ~ 4000 | ± 10 ~ 6000 | ± 10 ~ 8000 | ± 10 ~ 12000 | ± 10 ~ 20000 | V |
Discharge RC value | C: 100 pF ± 10%, R: 1.5kΩ ± 1% | ||||||
Peak short-circuit current Ips | 0.67A ± 10 % per kV | ns | |||||
Short load rise time Trs | 2 < Trs < 10 | ns | |||||
Short load decay time Tds | 130 < Tds < 170 | ns | |||||
Short Load Ringing Irs | < 15% of Ips | ||||||
500Ω load peak current Ipr | Ipr/Ips ≥ 63% | ||||||
500Ω load rise time Trr | 5 < Trr < 25 | ns |
- ESD External Human Metal Model (HMM) Waveform Generation Module
Designed to meet the requirements of the ANSI/ESD SP5.6-2019 standard
<<<<提醒:左右滑动表格>>>>parameters | HMM-8 | HMM-24 | HMM-36 | unit (of measure) | note |
HMM first peak current | 90 | 90 | 135 | A | 3.75 A per 1 kV ≤ ± 10 % IEC 61000-4-2 (R=330Ω, C=150pF) |
HMM current @ 30 ns | 48 | 48 | 72 | A | ≤ ± 10 % (better than IEC standard ±30%) |
HMM current @ 60 ns | 24 | 24 | 36 | A | ≤ ± 10 % (better than IEC standard ±30%) |
- ESD External Machine Model (MM) Waveform Generation Module
Designed in accordance with the requirements of the ANSI/ESD STM5.2-2019 standard
<<<<提醒:左右滑动表格>>>>parameters | MM-2 | MM-4 | unit (of measure) | note |
output voltage | ±10 ~ 2000 | ±10 ~ 4000 | V | |
Discharge RC value | C: 200 pF, R: 0 Ω | |||
Short-circuit load peak current Ip1 | 1.75±10% per 100V | A | Tolerances will be different if sockets are used | |
Short-circuit load Ip2 | Ip167% ~ 90% | A | ||
Short-circuit load waveform period tpm | 66 < tpm < 90 | ns | ||
500 Ω load peak current Ipr | 0.85 - 1.2 | A | @400V compliance conditions | |
500 Ω load I100 | 0.23 - 0.4 | A | @400V compliance conditions | |
500 Ω load I200 | Measured I10030-50% | A |
Option Ordering:
As you can see from the table above the ES612A is available in a variety of test configurations and test accessories, please select an option below to contact us for a quote.
<<<<提醒:左右滑动表格>>>>serial number | Model number | descriptive |
ESD Tester | ||
1.1 | ES612A-2K | ES612 ESD Tester, up to 2kV, supports RS232 SCPI |
ES612A -4K | ES612 ESD Tester, up to 4kV, supports RS232 SCPI | |
ES612A-6K | ES612 ESD Tester, up to 6kV, supports RS232 SCPI | |
ES612A -8K | ES612 ESD Tester, up to 8kV, supports RS232 SCPI | |
ES612A -12K | ES612 ESD Tester, up to 12kV, supports RS232 SCPI | |
ES612A -20K | ES612 ESD Tester, up to 20kV, supports RS232 SCPI | |
1.2 | ES612A -HBM-2 | Mannequin 2 Pin Model, 2kV |
ES612A -HBM-4 | Mannequin 2 Pin Model, 4kV | |
ES612A -HBM-6 | Mannequin 2 Pin Model, 6kV | |
ES612A -HBM-8 | Mannequin 2 Pin Model, 8kV | |
ES612A -HBM-12 | Mannequin 2 Pin Model, 12kV | |
ES612A -HBM-20 | Mannequin 2 Pin Model, 20kV | |
1.3 | ES612A -HMM-8 | Human Metal Model 2 Pin Model, Equivalent to 8kV HMM |
ES612A -HMM-24 | Human Metal Model 2-pin model, 24kV HMM equivalent | |
ES612A -HMM-36 | Human Metal Model 2-pin model, equivalent to 36kV HMM | |
1.4 | ES612A -MM-2 | Machine Model 2 Pin Tester Model, 2kV |
ES612A -MM-4 | Machine Model 2 Pin Tester Model, 4kV | |
attachment (email) | ||
2.1 | CT-002-T | Current probe 1 kHz to 2 GHz (better than Tektronix CT1 & CT2) |
2.2 | ES62X-CMPS | Simple Manual Probe Stations |
2.3 | XYZM | XYZ probe holder, 500 mils of XYZ travel, 0.01mm per step |
2.4 | XYZM-HBM | HBM Probe Arms |
2.5 | XYZM-HMM | HMM Probe Arm (47.5R) |
2.6 | HBM-TC0.3 | 0.3 mm Pitch Test Clips for IC Probe Packages |
2.7 | HBM-TC2.5 | 2.54 mm Pitch Test Clips for PCB Probes (1 set included in default configuration) |
2.8 | XYZM-PP048 | 0.48 mm Spring Loaded Needles for Package Level Testing (Pack of 20) |
2.9 | XYZM-TN1 | Tungsten Steel Needles - 5 mils tip for wafer level testing (Pack of 10) |
Third-party equipment | ||
3.1 | KSMU2400 | SMU, 200V, 1A, 20W, single channel (for automatic DC failure detection of equipment)) |
3.2 | OSC-1G | 1 GHz BW, 5Gs/S, 4-channel oscilloscope |
Automation Solutions | ||
4.1 | HBM-RE64X2 | 64X2 Pin Adapter Expansion Module for HBM Automated Testing |
4.2 | HBM-RE128X2 | 128X2 Pin Adapter Expansion Module for HBM Automated Testing |
4.3 | HBM-RE256X2 | 256X2 Pin Adapter Expansion Module for HBM Automated Testing |
4.4 | ES62X-PC-SW1 | Desktop PC with pre-installed automated test software for 2-pin, pulse and SMUs |
4.5 | ES62X-PC-SW2 | Desktop PC with pre-installed automated test software for 2-pin, pulse, oscilloscope and SMUs |
4.6 | ES62X-PC-SW3 | Desktop PC with pre-installed automated test software for RE Multi-Pin, Pulse, Oscilloscope and SMUs |
4.7 | ES650-150 | Fully automated 2-pin low parasitic mechanical automation solution (Unlimited pins, no PCB, PC & fully automated software included) |