Product Description:
Dito is a handheld electrostatic discharge gun manufactured by EMTEST, with a contact discharge up to 10kV and an air discharge mode up to 16.5kV. It complies with the basic standards: GBT 17626.2-2006 & IEC 61000-4-2 & EN61000-4-2 Electromagnetic compatibility Test and measurement techniques Electrostatic discharge immunity test.
Static electricity from a human body to an object or between two objects can sometimes generate voltages of up to several thousand volts, which can cause malfunctions or even damage to electrical and electronic equipment circuits. dito is a state-of-the-art electrostatic discharge test equipment, capable of accurately simulating static discharge pulses in accordance with the requirements of standards such as EN / IEC 61000-4-2.
To ensure reliable and repeatable testing, the EMTEST dito is able to measure and record the discharge voltage, and the electrostatic discharge gun automatically stops the discharge and indicates when the battery voltage is too low. In addition, the replacement of the discharge head and the discharge network can be accomplished by simply plugging and unplugging. emtest's electrostatic discharge gun automatically recognizes the discharge network used and displays the resistance and capacitance values of the discharge network on the display, thus ensuring that the network selected by the user meets the requirements.
Product Features:
- Ergonomic design
- Weighs only 870 g
- Interchangeable discharge heads
- Interchangeable discharge modules
- LifePO4 New rechargeable batteries to support long duration testing
- Built-in library of standard test programs
- Measurable and controllable test voltage
- Contains various test programs for testing and evaluation
- High-end user experience with esd.control software
- Option - fiber optic link for connecting dito to computer (USB port)
- Simple program to test against a variety of standard ratings Quick-start test program with on-line adjustable parameters for fast, simple operation Evaluation program to perform a 20 Hz air discharge to evaluate the test points of the equipment under test
- Standardized test procedures according to EN / IEC 61000-4-2 and
- EN 61000-6-1 / -6-2 Standard
- Settings, parameters, standard grades, etc.
- Display, LCD graphic display, 128 x 64 pixels
- Operation, 5 function keys, 2 arrow keys, pulse trigger key
Meets criteria:
- Bellcore GR-1089-Core
- Chrysler PF-9326
- DaimlerChrysler PF-10540
- EN 300329
- EN 300340
- EN 300342-1
- EN 300386 V1.3.2
- EN 301489-1
- EN 301489-17
- EN 301489-24
- EN 301489-7
- EN 55024
- EN 61000-4-2
- Fiat 9.90110
- Ford EMC-CS-2009.1
- Ford ES-XW7T-1A278-AB
- Ford ES-XW7T-1A278-AC
- Ford WDR 00.00EA
- IEC 61000-4-2
- IEC 61326
- ISO 10605
- ITU-T K.20
- ITU-T K.21
- ITU-T K.45
- JASO D001-94
- mil std 461 g cs 118
- Renault 36.00.400/B
- Renault 36.00.400/C
- Toyota TSC3500G
- Toyota TSC3590G
- Volvo EMC Requirements (1998)
DITO Technical Data:
<<<<提醒:左右滑动表格>>>>Product model | Dito |
manufacturer | AMETEK - EMTEST |
agent | EUTTEST |
Contact discharge mode | 500 V - 10,000 V +/- 5% |
Air Discharge Mode | 500 V - 16,500 V +/- 5% Resolution in 100 V steps |
Holding time | Greater than 5 seconds |
polarities | Positive and negative |
test voltage | And through the display |
Single pulse mode | Generates a single pulse |
Continuous mode | Continuous discharge up to 20 Hz Contact discharge up to 10 Hz |
software-triggered mode | Remote control by computer software via fiber optic interface |
Contact discharge mode | EN/IEC 61000-4-2 compliant; 150 pF / 330 ohm |
rising time | 0.8 ns +/- 25% |
First peak current | 7.5 A at 2 kV +/- 15% 15.0 A at 4 kV +/- 15% 22.5 A at 6 kV +/- 15% 30.0 A at 8 kV +/- 15% |
Current value at 30 ns | 4.0 A at 2 kV +/- 30% 8.0 A at 4 kV +/- 30% 12.0 A at 6 kV +/- 30% 16.0 A at 8 kV +/- 30% |
Current value at 60 ns | 2.0 A at 2 kV +/- 30% 4.0 A at 4 kV +/- 30% 6.0 A at 6 kV +/- 30% 8.0 A at 8 kV +/- 30% |
electricity supply | Battery-powered with over 70,000 continuous discharges at 16.5 kV Automatic power-off after more than 10 minutes of inactivity LiFePo4 battery capacity 12.8 V - 1000 mAh Power supply, via MAD power adapter |
weight | Approx. 870 g (including battery) |
Optional accessories
<<<<提醒:左右滑动表格>>>>DM1 | 150 pF / 330 ohm Discharge Module with built-in Discharge Switch |
Discharge heads that can be ordered by contacting euttest | Air Discharge Head Contact Discharge Head |
rechargeable battery | PowerPack dito LiFePo4 Battery Capacity 12.8 V - 1000 mAh Built-in low voltage protection safety module |
Battery Charger | dito Charging Unit - CU dito |
suitcase | / |
2m Grounding | / |
DM1-RFCI | 150pF / 330 ohm Fast Relay Discharge Module Rise time 200 ps - 300 ps |
DM2 | 150 pF / 2,000 ohm discharge module |
DM3 | 330 pF / 2,000 ohm Discharge Module |
DM4 | 100 pF / 1,500 ohm Discharge Module |
DMx | Discharge modules customized to user requirements |
esd.control | Remote control and report generation software Fiber optic interface IFA |
EAS 30 | 2 x 470 kohm earth resistance wires |
MAD | AC Power Adapter |
optical interface | Fiber optic connection between dito and computer (USB interface), USB type A interface Cable length 3 m or 6 m Maximum baud rate 19,200 |
Test certificates and operating manuals | / |
AOEMC-NCT-ESD | Static Test Table 1.6*0.8*0.8 meters pure wood laboratory table (More sizes can be customized by contacting EUTTEST) |
AOEMC-HCP | Customizable Size - Horizontal Coupling Plate |
AOEMC-VCP | 50 cm x 50 cm vertical coupling plate |
AOEMC-ESDB | Electrostatic brushes |