Introduction:
The DGA 9552N is a Schwarzbeck designed and manufactured product that can be used in the DC-18GHz frequency range and can be configured as a 3dB attenuator, 6dB attenuator, 10dB attenuator, 20dB attenuator, 30dB attenuator, or 40dB attenuator, and you can choose one of the attenuation values, but note that the attenuation values are factory fixed. factory-fixed, you can also order all together, the product is authorized by the Shenzhen EUTTEST agent sales quotes and after-sales service. During calibration of EMI receivers, it is necessary to connect an additional attenuator directly to the output of the pulse generator. The nominal attenuation value is printed on the housing of the attenuator and we calibrate each product individually and provide factory calibration data.
If you need a cheaper attenuator that can only be used up to 2GHz, please shop around:DGA 9553BNC
Test application:
The attenuator DGA 9552N sequence is designed to be bi-directionally usable, so you can change the direction of use of the attenuator at will. There are a wide variety of applications for this attenuator:
- The measurement range of the spectrum analyzer can be increased.
- It prevents overloading of any kind of meter; it can be used to control the linearity of meter readings.
- Measurement uncertainty due to mismatched impedances can be minimized.
Technical parameters:
<<<<提醒:左右滑动表格>>>>Product model | DGA 9552N |
manufacturer | Schwarzbeck, Germany |
agent | Shenzhen EUTTEST |
Product name | Fixed attenuator |
Available frequency | DC- 18 GHz |
Selectable attenuation value size |
|
power (output) |
|
VSWR |
|
Length of different structure types | 56.4 mm (type A see below) From: 45.2 (3 dB, type B) To: 48.5 mm (40 dB, type B) |
(an official) standard | MIL-DTL-3933 |
impedance | 50Ω |
Graph of related technical parameters:
The DGA 9552N attenuator is designed in both TypeA and TypeB form factors to account for heat dissipation and test area constraints, and both form factors are identical in terms of technical parameters such as S21.

The attenuator is available in two configurations (type A and type B)

S21 parameter curve with 10dB option
As mentioned above, the 9552N can also be optionally configured with a variety of attenuation sizes such as 3dB, 6dB, 10dB, 20dB, 30dB, 40dB, etc. For more S21 curve diagrams of the 9552N attenuator configurations, please contact us for more information.