Introduction:
CDN M3PE 32A 1000V is a 3-wire coupling and decoupling network manufactured by SCHWARZBECK Company in Germany, authorized by Shenzhen EYT Company for sales and quotation service. This CDN coupling and decoupling network supports DUT line-to-ground voltage up to 500V AC and 1000V DC, and maximum saturation current up to 32A, which can be used for EMC testers to conduct conducted common-mode immunity test according to IEC 61000-4-6 Annex D.2, and is suitable for conducting immunity test along the power line of unshielded AC and DC power lines (utility). It is suitable for conducting immunity tests along power lines for unshielded AC and DC power lines (mains).
This device is compatible with CDN M3 32A 1000V The maximum current of both is 32A, but the CDN M3PE described on this page contains one ground and two fire wires, which is not the same test pattern as the three fire wires of the CDN M3 32A 1000V, so please select the product according to this description and test requirements.
Safety Instructions:
For increased operational safety, the mains voltage connections when using this device are made using safety sockets. If you intend to design your own adapter, we recommend that you use a special 4 mm safety plug, these connectors can also be purchased by contacting us.
Technical parameters:
<<<<提醒:左右滑动表格>>>>Model number | CDN M3PE 32A 1000V |
Device name | Three-wire coupled decoupling network-CDN |
manufacturer | Schwarzbeck |
agent | EUT TEST |
Test frequency range | 150kHz-230MHz |
Common mode impedance of CDN | At 150 kHz - 24 MHz: 150 Ω ±20 Ω At 24MHz - 80MHz: 150 Ω +60 Ω / -45 Ω 80 MHz - 230 MHz: 150 Ω ±60 Ω See common mode impedance graph below for detailed values. |
Maximum RF Voltage | 30V |
Maximum input power | 6W |
connector | BNC |
impedance | 50Ω |
Maximum Operating Voltage - Line to Ground | 500V AC 1000V DC |
Maximum operating voltage - line to line | 1000V AC 2000V DC |
saturation current | 32A |
size | 216 mm*105 mm*108 mm |
weight | 1.8 kg |
Recommended Calibration Options | CA 3/4 SR 30/4 SR 100-6W |
Common mode impedance plot:
The following figure shows the common mode impedance curve of this product in accordance with the requirements of IEC 61000-4-6 and GBT 17626.6 conducted immunity test standard, the red line in the figure represents the impedance value range given by the standard.

CDN M3PE Common mode impedance plot
Product Recommendation:
- Learn how to shop for a CDN?
- Need CDNE?
- Need more CDN & CDNE Coupling & Decoupling Networks models with test voltages and number of cables under test?
Please go to the following link to view:
Difference between CDN and CDNE Schwarzbeck Coupling Decoupling Networks Product Catalog