Langer is the company abbreviation of Langer EMV Technik GmbH, Germany langer is at the forefront of research, development and production in the field of electromagnetic compatibility. From time to time, through EMC experimental seminars and EMC seminars, we provide comprehensive knowledge of EMC rectification for the majority of electronic product developers.
Langer EMV develops EMC rectification measurement equipment for EMV electromagnetic emission analysis during assembly development (PCB) and integrated circuit development (IC).
PCB printed circuit board ESD, EFT, SURGE rectification analysis methods and tools
Radiated Emission RE, CE Rectification Analysis Methods and Tools for PCB Printed Circuit Boards - Near Field Probes and Preamplifiers
Optical signal transmission systems for analog, digital, CAN and LIN buses
Burst pulse train detector, 100kHz-6GHz near-field probe, 100kHz-6GHz preamplifier
Emission and immunity test systems and test sets for ICs in accordance with IEC61767 and IEC62132
Integrated Circuit IC and PCB Test and Calibration Benches (Fixtures)
Integrated Circuit IC Test Technology and Test Equipment
EUTTEST agent sales Germany Langer company's interference generator and near-field probes, preamplifiers, IC-EMC test system, another EutTest provides sold Langer after-sales installation and training services.
S2 set is a pulsed magnetic field monitoring probe manufactured by langer-emv, Germany and distributed by EUTTEST, designed for the correction of products that have failed electrical fast transient pulse train and ESD tests....
The RF-U Model 2.5-2 Magnetic Field Probe is a near-field probe for detecting RF currents in wires, component pins, SMD assemblies and integrated circuit pins. This probe has an approximately 0.5mm wide magnetic field sensitive notch at the tip, measuring...
The RF-R 3-2 near-field probe with high resolution is used for the direct detection of RF magnetic fields on electronic assemblies, such as magnetic fields in pin regions, IC housings, wires, bypass capacitors and electromagnetic compatibility (EMC) components. The magnetic field...
The Model RF-K 7-4 Near Field Probe is capable of measuring annular magnetic field lines that enter the probe in a reverse direction. These magnetic lines are typically found on wires, bar structures, cable splices, edges of flat cells, etc. The probe operates in a manner similar to that of an electric... The probe operates in the manner shown below similar to an electrical...
The RF1 set is a passive near-field probe set manufactured by langer emv in Germany and distributed by EUTTEST.The RF1 near-field probe set consists of 4 passive near-field probes for the measurement of electronic modules in the development phase...
The electrodes of the Electric Field Probe Type RF-E 10 are located on the lower side of the probe and are approximately 0.2 mm wide, allowing the smallest sources of electric field to be located, e.g. 0.1 mm wide wires, individual pins of high pin-count integrated circuits. Magnetic Field Probe RF-E 10...
The PT4 set is designed for efficient immunity analysis of components and equipment. The PT4 Burst Transformer converts the pulses generated by the Burst / EFT generator into potential-free pulse trains. These pulse groups are segmented...
PA 3010 is a preamplifier produced by Langer EMV in Germany and authorized by EUTTEST in Shenzhen for sale, the test frequency covers 10MHz-10GHz, PA 3010 is used for ...
You can search for: study materials, equipment models on the EUTTEST website.
