Introduction:
The BBV 9748 is a broadband preamplifier manufactured by Schwarzbeck, Germany and authorized by EUTTEST Shenzhen for sales, quotation and after-sales service. The amplifier can amplify measurement signals by more than 29dB in the frequency range of 10MHz-8GHz. The design uses an external power supply cable to power the amplifier, and is equipped with an aluminum enclosure and an N-flange connector as the signal output port.
Attention:It is generally not recommended to use the preamplifier BBV9748 to measure pulsed signals. This broadband noise is typical of many EMC measurements. This means that any broadband preamplifier is not suitable for EMC measurements of broadband pulse spectra.
Device Parameters:
<<<<提醒:左右滑动表格>>>>Model number | BBV 9745 |
manufacturer | Schwarzbeck |
Authorized Quotation and After Sales Service Provider | Shenzhen EUTTEST |
Frequency range | 10MHz-8GHz |
noises | 2.7 dB at 1 GHz |
gain | +29dB |
amplitude flatness | <± 3 dB |
1dB compression point | >-17dBm |
impedance | 50Ω |
VSWR | <2:1 |
Operating temperature | -10°C to 60°C |
electric power source | +10-15V, standard with power adapter |
size | 95*36*29mm |
weight | 130g |
Curve diagrams related to equipment parameters:

Gain Curve Diagram
Recommendations for products in the same sequence:
EUTTEST also offers more preamplifiers manufactured by Schwarzbeck, allowing you to select the amplifier model you need based on test frequency and gain.
- BBV 9718 C 0.5GHz-20GHz, 30dB gain Discontinued
- BBV 9718 D 1GHz-18GHz with 30dB gain
- BBV 9719 12GHz-28GHz; gain 30dB
- BBV 9721 12GHz-40GHz; gain 30dB
- BBV 9743 B 10MHz-6GHz, 28dB gain
- BBV 9744 9kHz-6GHz with 28dB gain
- BBV 9745 9kHz-2GHz, 30dB gain